the problem is that the AMD processors i have (1 palomino, 1 thoroughbred, and 1 barton), are having the speeds recognized correctly, but their voltages are NOT. they are being defaulted to 1.85 volts, way higher than what they are supposed to run at, and so they run way too hot
when i boot into the bios to change it, there is only 1 option to choose from, 1.85
i have tried flashing a bunch of different bios versions from asus including the latest 1013 beta, and every one of them is the same
this leads me to believe i will have to modify my own bios to set the default voltage to something lower, like 1.6 volts
now, correct me if i am wroing, but after lots of reading, i have determined that no version of modbin is compatible with asus bioses
even if i could find one that is compatible, would this setting be something i could change with it? or should i be looking elsewhere such as having to unpack the bios and edit cpucode.exe or stn.bin?
i am pretty good with assembly, but am new to bioses, some direction would be appreciated
