Hi !
Please help me , i have SIS 6326 8 Mb onboard AGP GRaphics card . But my graphics card does not except all latest games such as Medal of Honor , Half Hife , fifa 2002 etc . Please help me how can i play all these games ? . Looking for your help .
Thanks
Aggi
SIS card Problem Help !
Always Smile
Well, the SiS VGA you have isn't real 3D VGA, but anyway, if it's integrated, then you might want to flash to the latest BIOS to get the latest VGA firmware in there.
Also, try updating the SiS VGA drivers to the latest version.
Also, try updating the SiS VGA drivers to the latest version.
Soupy's advise would be the wisest decision. Even if you manage to "see" those games on your PC, you'd end up with emulated 3D out of a 2D engine.... everything'll be slow and jerky... ergo, unplayable.
I've seen SiS6326 as standalone AGP card once - and it was terrible experience
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
I also have one of the SiS cards (or, to be more precise, built-in graphic chip)... I'll have to dissapoint you, but with this graphic chip, you can't play games like Medal of Honor. This chip also makes problems with OpenGL (well, that's my case, because I have SiS 620), but it works fine with Direct3D.
Hi
I have an old Sis 6326agp gcard and i have only one question: can i use an old socket7 mainboard with a 32-pins dip bios-eeprom to flash the eeprom of my graphics card "amic A276308A" dip-28-pins using HOT FLASH tecnique ???
Is a dip-28 pin eeprom compatible with a dip 32-pins eeprom ?
Can uniflash support this operation ?
Regards
Accomp
http://acc.hop.to
I have an old Sis 6326agp gcard and i have only one question: can i use an old socket7 mainboard with a 32-pins dip bios-eeprom to flash the eeprom of my graphics card "amic A276308A" dip-28-pins using HOT FLASH tecnique ???
Is a dip-28 pin eeprom compatible with a dip 32-pins eeprom ?
Can uniflash support this operation ?
Regards
Accomp
http://acc.hop.to
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
I have this card/chip in an AOpen AX6BC (PII-300).
I posted some test results here, including results from 3DMark 99 MAX. Scroll down a little over half way...
- http://www.stud.fernuni-hagen.de/q39981 ... 0&start=20 -
AOpen 3D Artist PA-50
SiS6326M, 8MB, AGP 2X, 128 bit
5M triangles/sec peak
125M pixels/sec trilinear fill rate
I posted some test results here, including results from 3DMark 99 MAX. Scroll down a little over half way...
- http://www.stud.fernuni-hagen.de/q39981 ... 0&start=20 -
AOpen 3D Artist PA-50
SiS6326M, 8MB, AGP 2X, 128 bit
5M triangles/sec peak
125M pixels/sec trilinear fill rate
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
SIS has a small TSR utility to overlay the original Video Bios with a newer version - needed for the newer drivers to work
works with all SIS6326 cards either stand-alone (PCI/AGP) or built into motherboards(Pcchips M590 as example)
works with all SIS6326 cards either stand-alone (PCI/AGP) or built into motherboards(Pcchips M590 as example)
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
Really Denniss - do tell more...
The drivers I'm using from AOpen are -
SiS6326M.drv dated 01-5-99
SiS6326M.vxd dated 12-7-98
Version 4.10.01.1250
My card has a VESA 2.0 BIOS already...link for info on this TSR please??
The drivers I'm using from AOpen are -
SiS6326M.drv dated 01-5-99
SiS6326M.vxd dated 12-7-98
Version 4.10.01.1250
My card has a VESA 2.0 BIOS already...link for info on this TSR please??
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
Ty, Edwin
I have the TSR.exe utility (bios version 1.31) , but i can't use it, because Windows ME ignore this tsr loaded in the autoexec.bat....
Do you know a very economic tool to update an eprom ?
.. I have a multimouse , e simple smartmouse programmer used to program pic16f84, pic16f876, AVR processor etc., eeprom 24c16 (using a loader)+ smartmouse a 3.5MHz + gold card in iso slot, sec*a smartc*ard and ir*deto sma*rtcard.
Using an old gold smart car*d with a pic 16f84, can i make a modification in order to connect a 2763 eprom to this pic processor and use a loader to flash this eprom?
Regards
Accomp
I have the TSR.exe utility (bios version 1.31) , but i can't use it, because Windows ME ignore this tsr loaded in the autoexec.bat....
Do you know a very economic tool to update an eprom ?
.. I have a multimouse , e simple smartmouse programmer used to program pic16f84, pic16f876, AVR processor etc., eeprom 24c16 (using a loader)+ smartmouse a 3.5MHz + gold card in iso slot, sec*a smartc*ard and ir*deto sma*rtcard.
Using an old gold smart car*d with a pic 16f84, can i make a modification in order to connect a 2763 eprom to this pic processor and use a loader to flash this eprom?
Regards
Accomp
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
Latest driver is here :
http://driver3.sis.com/graphic/gpu/6326 ... in98me.zip
-> 4.12.01.1320 dated 3/2001
http://driver3.sis.com/graphic/gpu/6326 ... _win2k.zip
-> 4.12.01.1310 dated 6/2000
Bios TSR file maybe needed is here :
http://driver3.sis.com/graphic/gpu/6326/Tsr.exe
http://driver3.sis.com/graphic/gpu/6326 ... in98me.zip
-> 4.12.01.1320 dated 3/2001
http://driver3.sis.com/graphic/gpu/6326 ... _win2k.zip
-> 4.12.01.1310 dated 6/2000
Bios TSR file maybe needed is here :
http://driver3.sis.com/graphic/gpu/6326/Tsr.exe
Usually, when I use older VGA cards and manage to find a newer BIOS file for them, I end up going to a shop with an EEPROM programmer and have a new chip programmed. It's not that expensive.