I've got an old PC that I'm trying to setup for my young neice to use to type reports for school and stuff. It starts up normally with a memory test, and then follows by auto detecting the CD-ROMS, and then nothing happens. No beeps, no change in the screen. It just freezes right then and there.
I tried loading the BIOS defaults and still nothing happens. I tried resetting the BIOS using the jumper; no change. I considered flashing the BIOS but the computer freezes before it gets a chance to load anything, including the floppy disk drive.
I'm currently on the hunt for a manual, to make sure everything is optimally set, but I need to know if this is a fixable problem or am I just wasting my time.
If you need more info about my hardrive below is what I see when it starts:
Award BIOS v.4.51PG W6117MS v1.1 010998
then the memory test then
Award Plug & Play BIOS v.1.0A
followed by listing the CD-ROMS
and the BIOS string on the bottom of the screen is
11/19/97 i440LX-W977-2A69JM49C-00
BIOS Hangup
Microstar MS-6117 manual:
http://www.msi.com.tw/program/support/m ... 309&kind=1
Latest BIOS update (Award 1MB version):
http://66.96.84.4/support/bos_exe/mbd_bios/w6117v25.exe
Same BIOS, patched for large HDD support courtesy of Ajz:
http://wims.rainbow-software.org/ajz/MS ... 0128KB.zip
http://www.msi.com.tw/program/support/m ... 309&kind=1
Latest BIOS update (Award 1MB version):
http://66.96.84.4/support/bos_exe/mbd_bios/w6117v25.exe
Same BIOS, patched for large HDD support courtesy of Ajz:
http://wims.rainbow-software.org/ajz/MS ... 0128KB.zip
More than 100,000 BIOS strings in my database just now!
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI