Hello folks,
I'm trying to upgrade my Aspire 1700 portable with a 250GB HDD.
Previous attempts:
install the disk and ghost -> data corruption when writing beyond 120GB.
Detection in Windows is OK. No possibility to set anything HDD related in BIOS.
Now, I tried using the MaxBlast 4 utility, but the DDO options are greyed out. Formatting the drive with it's partition manager just likes formats the drive without doing anything special...
I found in a PDF, hidden somewhere deeply on the Maxtor site, that the DDO solution can not be implemented on Serial ATA and ATA/133 hosts.
Is that true or just BS?
If it true, d*mn...
If not, what do I need to do to get this baby working? Nowhere I can find any manual relating to the MaxBlast (or any like application) which explain me when the program adds the DDO software and when not...
250GB Maxtor MaxLine 3 on Acer Aspire 1700
Ghost may be limited by the BIOS, or it could be a native limitation in the version of Ghost; I have used an old version of Ghost to back up to a Maxtor 250 GB ATA/133 but only up to 128GB (deliberately, as that is the limit for Windows ME). Can you live with 2 partitions, making the first partition 128GB?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Actually, there are already 4 partitions on the disk!
the first 25, then 2 of 30 and the last one is just what's left.
The corruption occurs when copying data in Windows XP SP2, beyond 120GB (I think, calculated value, first three partitions + data on fourth)
It seems like he just continues copying in the beginning of the disk, thus overwriting the first partition...
the first 25, then 2 of 30 and the last one is just what's left.
The corruption occurs when copying data in Windows XP SP2, beyond 120GB (I think, calculated value, first three partitions + data on fourth)
It seems like he just continues copying in the beginning of the disk, thus overwriting the first partition...
Have you tried your version of Ghost on a PC with a BIOS that does support HDD>137GB? If so, did it work?
What version of Ghost do you have?
What version of Ghost do you have?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Hallo...
I am thiking to buy excactly the same Hard drive. actually Max line III 300GB serial ATA SATA 3GB the actual modle number is 7V300S0
I also have the aspire 1700 ...
So Owanneke ... did you manage it to work? or Not ?
and something else .. how did you manage to connect the serial ATA hd on the motherboard ?
Oh and something last for everyone .. maybe I did not understood right ... but if lets say I devide the partitions in 100 GB per partition then wouldnt everything work just fine ?
P.S. Hallo to all the forum !
I am thiking to buy excactly the same Hard drive. actually Max line III 300GB serial ATA SATA 3GB the actual modle number is 7V300S0
I also have the aspire 1700 ...
So Owanneke ... did you manage it to work? or Not ?
and something else .. how did you manage to connect the serial ATA hd on the motherboard ?
Oh and something last for everyone .. maybe I did not understood right ... but if lets say I devide the partitions in 100 GB per partition then wouldnt everything work just fine ?
P.S. Hallo to all the forum !