GF2MX400 "Sparkle" 64MB bios flash

Questions that don't belong in the other forums.
Post Reply
trodas
BIOS Newbie
Posts: 22
Joined: Sun Oct 15, 2006 6:47 pm

I recently recapped two these "Sparkle" GF2MX400 64MB AGP cards. They run beautifully, I removed the CE filters to get even cleaner image and so on... Quite good cards for folding/testing machines.

And I started to use one in testing and... and I wanted to remove the sign-on message. Easy tweak with bios. I saved the bios using nVflash 5.57 , tweaked it using Ray Adams nVidia bios editor v1.0 RC3 and then I wanted to flash it back, but bummer! Flash chip is not supported :(

I tried several older versions of nVflash (does this even have a sense?) as well as the WFflash 7.1 but it also does NOT recognize the flash type.

On the GFX card, there is the flash as:

PMC Flash
MFLCJ
0240
Pm37LV512-70JC

Anyone know a flasher that does suppor this suxxka? :?:
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

http://www.datasheetarchive.com/pdf/2772862.pdf

the 7 in the part number indicates EPROM, not flash rom, so a different technique is needed to erase it. I don't know how it's implemented on the card, but I expect a seperate jumper for erasing. I'm not surprised uniflash has no support for this, these chips are rarely used...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply