no video

Video, SCSI, modem, CDROM/CDR/CDRW, etc.
Post Reply
lee64
New visitors - please read the rules.
Posts: 3
Joined: Fri Nov 23, 2007 8:02 pm

Hi I have a (Dell FLEXATXSTC 733C) with a and a (MS-6312 VER) Motherboard. I am not getting any Video, I have tried has much troubleshooting has possible; the only option is to use my Advanced PC Diagnostic Card. The display on the card reads (EO) on the manual, it means (Initialize the Chipset) which tells me I have a (Boot Block in Flash ROM). Do I need to Flash ROM? Can anyone please help me?
lee64
Top
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:
Contact edwin

check first if you have bad capacitors.

http://www.badcaps.net
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Top
lee64
New visitors - please read the rules.
Posts: 3
Joined: Fri Nov 23, 2007 8:02 pm

thanks for the info edwin, the cause of the problem is bad capacitors.

lee64
Top
Post Reply

Return to “Video (VGA) and other BIOS/Firmware”