1440x900 bios update for Asus Terminator P4 533A Sis 651

Video, SCSI, modem, CDROM/CDR/CDRW, etc.
Post Reply
C_Burns
New visitors - please read the rules.
Posts: 6
Joined: Mon Jan 28, 2008 3:31 pm

I bought a wide screen monitor and need bios update for my Asus Terminator P4 533A with Sis 651.

Updated VGA driver to Sis uvga3_373 but still no 1440x900 support.

Please help.
Many thanks.
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

read this:
http://www.wimsbios.com/phpBB2/topic9748.html

don't forget about the DIRECT LINK :)
If you email me include [WIMSBIOS] in the subject.
C_Burns
New visitors - please read the rules.
Posts: 6
Joined: Mon Jan 28, 2008 3:31 pm

I am using the 1014.001 beta version bios.

Direct link is: http://dlsvr01.asus.com/pub/ASUS/Barebo ... 4cea01.zip


Many thanks
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

sent
If you email me include [WIMSBIOS] in the subject.
C_Burns
New visitors - please read the rules.
Posts: 6
Joined: Mon Jan 28, 2008 3:31 pm

cp,

thanks for the mod

but still have problem

flashed the mod bios, loaded the default settings, reboot and updated VGA driver to Sis uvga3_373 but still cannot find the 1440x900 option at the display adapter [list all modes].

have I missed out any steps in between?

kindly advise.
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

please post the version of the video bios. it is shown in the video adapter settings.
If you email me include [WIMSBIOS] in the subject.
C_Burns
New visitors - please read the rules.
Posts: 6
Joined: Mon Jan 28, 2008 3:31 pm

cp,

The video bios version is still 1.10.08 after the patched bios is flashed.
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

sorry, i picked the wrong file. my fault. i'll send you a patched version later today.
If you email me include [WIMSBIOS] in the subject.
C_Burns
New visitors - please read the rules.
Posts: 6
Joined: Mon Jan 28, 2008 3:31 pm

cp,

thanks for the revised patched bios.

flashed and updated video bios to 2.30.01

reinstall the Sis uvga3_373 driver, reboot but still no 1440x900 option

can't figure out what went wrong

any suggestions?


many thanks anyway
C_Burns
New visitors - please read the rules.
Posts: 6
Joined: Mon Jan 28, 2008 3:31 pm

finally I got it figured out

the culprit was the installation method of the SiS driver

originally, after I uninstalled the old driver and reboot, at the Windows Found New Hardware prompt I just directed the prompt to where I put the latest SiS driver. Update and reboot. No luck there was no 1440x900 option.

I uninstalled the driver again, reboot and I just ignored the Windows Found New Hardware prompt. Instead I used the SiS setup programme unpacked from the SiS driver zip file.

Reboot and there is the 1440x900 option!

Thanks again, cp
mzeist
New visitors - please read the rules.
Posts: 1
Joined: Fri Sep 19, 2008 10:08 pm

I have the exact same problem, could you sent me this bios also, please?
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

get it at the download page. read the sticky thread in this section to find out how to get to the download page :)
If you email me include [WIMSBIOS] in the subject.
Post Reply