Bios update for 02/12/1999-i440bx-ALI513

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
infotech
New visitors - please read the rules.
Posts: 2
Joined: Tue Jul 23, 2002 5:49 am

Can we have update for 02/12/1999-i440bx-ALI513 type mother board to install 40 GB hard disk

Reply to netsolution@vsnl.com
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Is the complete string 02/12/1999-i440BX-ALI513-2A69KPNDC-00 ? If so this should be Procomp, see http://www.procomp.com.tw/driver/ for download site.

The string does not say what model; there should be a message in the top left of the screen as it boots, under the Award logo, to say which model.

Edit: looks like B687, latest bios at ftp://61.220.120.253/download/b687v12.zip
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
infotech
New visitors - please read the rules.
Posts: 2
Joined: Tue Jul 23, 2002 5:49 am

Our bios string is 02/12/1999-i440BX-ALI513-2A69KPNDC-00 and version is B687 Bios Ver 1.2.
as pur your instractions we download the drivers from http://www.procomp.com.tw/driver/ and download the driver file b684v13.zip after run the programe the system hangs and thare is no display and long cont beebs. now our system is almost useless.

How can we get old posision and any way to update the bios.
Pls give some solution.
Thanks
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Now.... why on earth did you use the B684 update when you were told you have a B687??? :roll:
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

infotech wrote:Our bios string is 02/12/1999-i440BX-ALI513-2A69KPNDC-00 and version is B687 Bios Ver 1.2.
as pur your instractions we download the drivers from http://www.procomp.com.tw/driver/ and download the driver file b684v13.zip after run the programe the system hangs and thare is no display and long cont beebs. now our system is almost useless.

How can we get old posision and any way to update the bios.
Pls give some solution.
Thanks
Oh, dear. :(

Now it is time to read the "Wim's BIOS FAQ" topics about techniques for recovering dead motherboards. If your board tries to read the floppy disk, it may be possible to use the Awdflash command in autoexec.bat (see the FAQ). If not, you will need to "hot swap" your flash chip into another board and probably use Uniflash to flash it (see the FAQ).

Either way, you need to download the correct BIOS for B687 !
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Post Reply