40GB: 2A6LFI2CC-00

[jaccool]

BIOS number is 2A6LFI2CC-00
it is mounted in polish PC by OPTIMUS
it don't recognize HDD 40 GB

[NickS]

Is there a message in the top left of the screen under the "Award" copyright message ?

Don't worry if it isn't in the same format as this Iwill one.

Is it the same format as this :
xx/xx/xxxx-691-596-W877-2A6LFI2CC-00 ?
A Google search for 2A6LFI2CC says this string was for FIC, possibly KA-6100 (Wim's BIOS main site, Manufacturers/FIC) or 6130 (Edwin/"evasive" at Motherboards.org).

We need more information - is there anything written on the board e.g. 6100 or 6130 ? like in this picture

[jaccool]

Yes yes yes
THX that's it is
say search KA-S100 not KA-6100.
I don't know I may write MB BIOS number in the goodle's search
My MB looks exactly as shown and its number too.
thanks once more.

[NickS]

OK, if your board is the 6100, the latest BIOS and flash utilities are at the FIC website, at http://www.fic.com.tw/techsupport/bios/ ... 0_bios.htm. You need to know whether your board is PCB version 1.1 or 1.2 as the Nov 18th 1998 BIOS does not say it supports 1.1.

When you boot, on the screen that shows the memory count and the Award EPA logo, there will be a message at the bottom of the screen like
"11/09/1998-691-596-W877-2A6LFI2CC-00".
What is this message on your motherboard?

Near the top of the screen there will be a message like
"Version 1.1eI".
What is this message on your motherboard?

The BIOSes at the site will not support 40 Gb disks. We could patch one of these BIOSes to fix this, but we need to know which one. I have already patched the latest (PCB 1.2) version.

[jaccool]

Thanks I only know full BIOS number it is:

09/22/1998-691-596-W877-2A6LFI2CC-00

I don't know rev. of PCB because this MB is in another location far away me. I'll read this number at monday

I find one patched BIOS for disks grather than 32GB for 1.1e from RUSIA I find this by the GOOGLE

thx

[jaccool]

Hej

I on the screen is number
1.1dI

But on BIOS ROM little sticker with number
1.1eIs

best regards

JacekC

[NickS]

That is confusing.
It sounds as though your board could be 1.2, but it may be safer to stay with the 1.1DI version you already have, patched to support a bigger hard disk.
Would you like version 1.1GI patched ?
{correction} That should read

Would you like version 1.1DI patched ?

[jaccool]

Hi

Yes, if you can send me this version.

I Try this, I first save old BIOS and try newer one of course

THX

Best regards

JacekC

[NickS]

OK. Did you check for a version number on the board ?

Q: How do I know what PCB is my motherboard?
A: Check the corner of the board, nearest to ISA (or PCI) expansion slots, look for a number with a dot (.), e.g. 1.4.

[jaccool]

HI

Sorry I must go away from my jobs for a few days
And now I'm ready upgrade this FIC motherboard.

I try this BIOS but the FLASH programm return me message

"Insuficient memory"

By the way I check PCB rev. number
Uffff this is printed by very small digits

it is 1.2 version

JacekC

[jaccool]

HI


Yuuuupppiiiiii it works

It was flasher it is 6.25 and don't work properly.
I find new 7.00 and it work good
I use bios 610011DX ==> THX NickS
and I saw my new disk 40GB

THX once again