Search found 9 matches

by quixotic
Thu Mar 27, 2008 1:58 pm
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

The agp board worked, and the boot block does boot. The problem was with the floppy disk I was using at the time, so my system is restored. Thanks.
by quixotic
Wed Mar 26, 2008 3:56 pm
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

No, I'll try an agp board later today.
by quixotic
Wed Mar 26, 2008 1:39 pm
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

Already tried that; it doesn't boot dos at all. It starts to access the floppy and then the system hangs.
by quixotic
Wed Mar 26, 2008 2:06 am
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

The floppy drive lights up, and if I put a disk in the disk drive, it'll access it, but it won't load dos afterwards. The bios is on a socket, so I'm planning on buying a new chip from badflash.com
by quixotic
Tue Mar 25, 2008 1:29 pm
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

I used Winflash, and no it didn't.
by quixotic
Tue Mar 25, 2008 12:44 pm
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

No, the system won't boot at all anymore.
by quixotic
Mon Mar 24, 2008 3:40 pm
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

Thanks!
by quixotic
Sat Mar 22, 2008 1:02 am
Forum: Video (VGA) and other BIOS/Firmware
Topic: Need vbios for ECS L4S5MG/651+ 3.02
Replies: 16
Views: 10271

Need vbios for ECS L4S5MG/651+ 3.02

Hello,

I was wondering if anyone could help me with an update for the vbios of a l4s5mg/651+ rev 3.02 motherboard with an sis 651 chipset.

Thanks, I've included a link to the bios below.

http://www.ecs.com.tw/ECSWebSite/Downlo ... =2&LanID=0