I have 2x 256Mb ddr266Mhz. When i put both on my hp pavillion ze5170, after 10 - 20 mins, the system will crash, system error. But when i only put 1x 256mb ddr266Mhz and tried it on each ram slot, the system is stable but then slower because of low ram. I verified it using memtest v1.65. Anybody has an idea??
Need advise..
thank you.
HP Pavaillion Ze5170
WinXP HE, WinXpPro with SP2
Pentium4 2Ghz
40GB Hd
2x256Mb ddr266Mhz
ren
RAM Problem
did you (mem-)test it with both sticks,too? do both sticks have the same timings? you can read them out with cpu-z. maybe the ALi chipset isn't able to set different timings for different ram slots (just guessing. no datasheets available,sorry).
did you (mem-)test it with both sticks,too? do both sticks have the same timings? you can read them out with cpu-z. maybe the ALi chipset isn't able to set different timings for different ram slots (just guessing. no datasheets available,sorry).
I checked the both sticks using cpu-z --> it has same timings. But one my mainboard is detected as ze4000 instead of ze5170. Why is this so, any ideas?
Thanks
I checked the both sticks using cpu-z --> it has same timings. But one my mainboard is detected as ze4000 instead of ze5170. Why is this so, any ideas?
Thanks