BIOS Updates forum

I repair m530 with one similar mobo using uniflash, and when use that mobo to reprogram the bios of m537 including boot block, uniflash work perfect, but when I place bioschip in m537 does not give video and they sound 1 beep long 2 short and Repeating (Endless loop), I see that’s beeps means proble...

Thaks for all Nicks, I would try again using Uniflash, go to "advanced" menu and flash including bootblock. Make sure you have the correct voltage on the motherboard for the chip (12v for 28Fxxx, 5v for 29Fxxx). Quote: i`ll make sure use correct voltage, now, when i flash a bios by hot-swap and use ...

I have three dead mobos "1) SOYO sy-6ba+III, 2)M537 3)M530", I :cry: damage "2" and "3" when tries to repair "1", which I did was to try to do hot-swaping in 2 with bioschip of 1, because awardflas 8.22b said "part number mismacht" i try with uniflash without obtaining no result good, not if the 1 w...