BIOS Updates forum

The other screens work without any problem, but when I select "IDE HDD Auto Detection" there are some display errors and when it comes to Secondary Slave it hangs.

Stupid me. I flashed the BIOS again with command line options you gave me. Now autodetection works, but the "Standard CMOS Setup" still hangs.

The Maxtor HD is the only thing connected to IDE.

Nothing, only one HD at the primary channel jumpered to master.

It's not the Autodetection that fails, but the printing of the Bios Screen.

Thx, i was able to flash the Bios, but afterwards when i enter the Bios-Setup and select "Standard CMOS Setup" to activate the Autodetection of the HD the Setup hangs while printing "Secondary Slave: "

Can this be fixed?

ScottyTM

Hi, my Board does't recognize my 80GB HD- It hangs during "Detecting IDE Primary Master". I tried the following BIOS-Versions: First ftp://ftp.fic.com.tw/motherboard/bios/socket7/va-502/Award/110aj13.zip then this ftp://ftp.fic.com.tw/motherboard/bios/socket7/va-502/int13/ajw1393dc4.awd Both doesn't...