BIOS Updates forum

at last I finally installed a 500Mhz cpu and a new hd, a 100G 5400. tryed to install winXP, but when the sistem reboot to finish the installation the sistem tells "disk problem". i think that the bios din't recognize a 100G hd, is it possible? is it a problem that i can fix by flashing the ibm lates...

hi,
it it better to replace the 600 fan-module thermal pad?
will the 3M pad work good?

ss

It is actually the whole module you replace. you have the connector on the other side of the assy. If your module was correct you only have to open the 600, unscrew the fan and module, snap it off the mobo and replace it with the new module, add some Artic silver and back with everything and you´e ...

No...You have to find the mmc-2 type! finally i bought this CPU http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=6876756603&ssPageName=ADME:B:EOIBSA:IT:11 i hope it will work, did it? I am arrived to the processor card, I thought i find a carving near CPU to translate and unblock CPU's feet, but i...

Lazerman, i think that the 600E have one module solder on the motherboard, and one slot free. you can install max 256MB on each slot, but the soldered module is often 128MB, so you can get 384MB of memory, if you are practice of soldering you can put 512MB... Hi to all, i decided to renew my father'...