Search found 5 matches
- Sun Jul 30, 2006 11:18 pm
- Forum: Notebook BIOS and other problems
- Topic: which is known to run ok on 390E
- Replies: 41
- Views: 33116
usb and floppy are now working using a 10Kohm resistor. didn't work when put together on the table, but when assembled into the case it worked. starting to get a little graphics corruption around the curser after it has been on for a while, maybe heat or the agp bus isn't running at the correct speed.
- Fri Jul 28, 2006 4:51 am
- Forum: Notebook BIOS and other problems
- Topic: which is known to run ok on 390E
- Replies: 41
- Views: 33116
wOOt 100-MHz of fsb love'n:) No usb or floppy drive. Seems strapping pin 14 high drowns out the 48-MHz usb clock signal. I will play with different resistors to see if I can get it to work. I do not measure any conductivity from pin b34 (see ftp://download.intel.com/design/mobile/datashts/24366801.p...
- Thu Jul 27, 2006 11:09 pm
- Forum: Notebook BIOS and other problems
- Topic: Flashing without a floppy drive
- Replies: 9
- Views: 9694
- Thu Jul 27, 2006 7:26 pm
- Forum: Notebook BIOS and other problems
- Topic: which is known to run ok on 390E
- Replies: 41
- Views: 33116
- Thu Jul 27, 2006 6:06 pm
- Forum: Notebook BIOS and other problems
- Topic: which is known to run ok on 390E
- Replies: 41
- Views: 33116
not working for me
http://smartdata.usbid.com/datasheets/usbid/2000/2000-q2/cy2285.pdf i got a 390e with the cypress CY2285PVC-2 pll chip, see above pdf. i lifted pin 14 from the circuit board and straped it high with a 10Kohm resistor to pin 1. i boot and cpuz says it is 66mhz :cry: help please. i did see there are ...