BIOS Updates forum

Sorry for the late post, I've given up on the subject for quite some time but from what I gathered from other forums it was the number of boards I had on the pci bus. It seems that the controller couldn't allocate enough irqs...or something...so I did manage to get it working for a few days when i ...

I have another problem with the board concerning the usb. When I connect my memory stick(2Gb) to it and try to copy something(to or from) it works for only about 10 mb until it gives me this message: Cannot create or replace xxxxx: Cannot read from the source file or disk, after which it won't open ...

up

I was referring to the memory bank(pair of slots)
edit: By the way, I tried running memtest86+ and it said my memory control chipset is vt82c585. I found its data sheet here http://www.digchip.com/datasheets/parts ... 82C585.php , but I can't understand a thing. Hope this helps...

I did the last tests and i found something interesting:
first of all, the {}{2x16} arrangement works and second, if I leave only the 32mb modules on each memory bank it only recognizes 32mb of memory.
@Deniss: I checked the modules and it doesn't say if they're edo or sdram but the pin layout is the ...

OK, I tried all possible combinations again, just to be sure, and the modules are recognized as expected:
16mb,32mb-works(recognizes only 64mb though)
32mb,16mb-works(same)
{2x16mb},{} -works
{2x16mb},{2x16mb}-works
{} ,{2x16mb}-i don't know if it works since the computer didn't start up, but this ...

16 on the 32mb modules and 8 on the 16mb ones(each)

The 32 mb modules each have two stickers: one of them has written on it:
AXS Memory prod. 980202
ART-118018-A
Warranty void if removed

on the second i could barely make out: 32MB
on the chips themselves there's:
USA 9803
S4004SE1DJ
06
and on the board on which the chips lie:
HJ M1 94V-0

On the ...

Ok, so, about the hard disks: I tried again this morning with all three and it works :D . I did as you saidl, changed the jumpers from cable select to their appropriate positions, but it still won't boot from the smallest one(1 gb) the message I get is: Invalid system disk. Replace the disk, and ...

Well, to tell you the truth, I don't even know the difference between the flash and the bios, but I tried to add three dard drives to the same motherboard and it doesn't accept them (one's 1gb and the other two are 6.3gb each) I removed one of the 6.3 gb hdd's and it works now (I don't remember the ...

Hello! I have the same problem. Spinerri, could you tell me if you solved yours, and how?