BIOS Updates forum

Hi there,

I think it goes well, I've changed the microprocessor voltage from 3.41 to 3.52. Maybe he was getting a little loose if the power supply is a bit worn.

Thanks for the input, I keep the web to look.

Yesterday after formatting a floppy disk, I went to turn off the computer and turned to lock this in windows is restarting. After installing several games, toys and various games and did not give any problem. Yesterday activate the system bios cacheable. Today reformat the computer and reinstall the...

The cd-rom worked pretty bad. With the new cd-rom I have no problems with any cd. With the former, the few games I installed, but when I was playing with them, I used to fail the reader and came out blue screen. Now fix computer crashes. It was the sound card a sound blaster 16 pnp isa ide. Active 1...

Well, finally we've removed the thermal paste to the microprocessor heat sink. I cleaned the pins on the microprocessor with alcohol. And I left without thermal paste, as these chips in their day were sold without thermal paste. I have also put lubricant fan power supply, brand 3 in 1. Besides leavi...

Yesterday I went back to install the old bios. And go back to the computer as before. Do not delay when you restart the computer, after leaving the screen windows is rebooting. Nor delay when displaying the initial screen when turned on. Today 133mhz microprocessor smite out, and again you will put ...

Windows 98 installs the cd-rom. Some cds I read them well, such as the original cd games that are not scratched anything. Cd with some data has given me problems with reading it. On other computers these cds have not given me any problems. As you say it may be the power supply, to make it work a lit...

I read online, that the larger size of the hard drive, but the computer becomes slow when turned on and off. Well, it becomes a bit slower in those two things I do not care. While not blocked. I ordered on ebay a micro mmx 200 mhz used, 2 ide cable 40 new threads, a reader new samsung 52x 1 new flop...

32 gb I have enough, I have 20.4 gb hd. Today buy a processor pentium 200 mmx by ebay. No will make it work better if the bios have a newer, powerful and micro mmx technology. Since the bios is newer, maybe help. Now I have put a 133mhz pentium. I think the team works well. On occasion I was blocked...

They should have cast it better with floppy, but it was a hassle to remove the floppy drive from another computer again ...

Hello, Now I have updated the bios. In the end I did loading the boot disk with cd-rom windows 98 and put the BIOS file on C: along with AWDFLASH. Use AWDFLASH version 6.6. I was taxed the old bios in a file called mia, but no extension. I forgot to put extension. If I put the extension I'll have a ...

I found ancient chronology hd online The 4.51PG has a maximum limitation of 120GB, while beyond this barrier 6.00PG. Another issue is the BIOS date 4.51PG, if it was before the end of 1997 only supported 8.4 GB. Prior to the third quarter of 1999 only up to 32GB. In early 2000 up to 64GB, and from t...

Although I prefer the 20GB, my economy is KO. Spain is dead. hehe

If I do not succeed with the bios, then maybe I buy a gizmo of these: http://www.ebay.es/itm/151274203099?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_4248wt_1001 Besides having to change cd-rom, ide cables and microprocessor. In the end it will cost me more than a second hand pentium 4. Th...

I read online that the voltage determines what type of chip. I do not know if will be right. I've always had a12 v, I guess it's because it has to be. I have seen other boards mp071b bases that have set in 5 v. I guess it will be because the chip is from another manufacturer, but also use award bios...