BIOS Updates forum

Thanks everybody

the problem was an instable RAM, and now everything works well, I have to test the other PCs as well

thanks again for your support

thanks NickS

Please tell me whats wrong then and how to use it, coz I'm having the same problem with 3 other machiens

thanks

yes the clear CMOS Jumper is set to normal

I want to replace the chip coz whenever I boot the PC (warm or Cold Boot) it gives me a Checksum Error message and resets the BIOS. According to Soyo's Technical Support, This maybe a battery problem or a Faulty Chip. And I replaced the battery and flashed a new BIOS sucssesfully but the problem sti...

The board is Soyo 5ED

and it doesnt have a programming voltage jumper

Some boards like Abit doesnt support 400 MHz although they supports 533 and 800, so maybe your board is one.

Check your Manula to be sure

Hello, I have a Motherboard with a faulty chip PN: MX28F1000: MXIC 12 volt flash ROM (it failed many times b4 and never saves the settings or the clock, i replaced the battery but to no avail) and I have another dead board with a working chip PN: 29EE010: SST 5 volt flash ROM . my question is: Can I...