BIOS Updates forum

Supersoul. Someone has removed the heat sinks off this module! I would recomend you to contact the seller. It is actually the whole module you replace. you have the connector on the other side of the assy. If your module was correct you only have to open the 600, unscrew the fan and module, snap it ...

supersoul

will this http://cgi.ebay.it/850-MHz-MOBILE-PIII- ... dZViewItem
works for my 600E?[/quote]


No...You have to find the mmc-2 type!

I "repaired" the ss mod to it's original layout. I have to say it was quite tricky to make an air wire to repair the "cut"! (I should have tested that before modding!) The good thing is that my mobo seems to have speedstep technology. I have 747MHz on AC and 598MHz on DC. The bad thing is that it's ...

Sharedoc wrote:Did you try booting with charger connected and after XP booted, run DeepSleep in a DOS commend window?

Yes, I tried all possible options as I know and could imagine.

I'll try to "repair" the ss mod tonight to see if my mobo has the speedstep utility.

Will be back later with the result.

Yes, I have installed his Deepsleep without success, but I am not sure how I include this in boot sequence. Should I just place it in the autostart folder? Just to be clear it runs @747 all the time, nothing to complain there. It is only the power up that couses me trouble. I also found out that I c...

I could not keep my hands off my TP600X when reading this thread. Replaced my originally pIII450 with a pIII750 bougt on ebay. Did the ss mod described earlier in this thread by Sharedoc but could't do the fsb mod thus my mobo was totally different from pics. It runs @ 750, but I have to plug in and...