BIOS Updates forum

aa a01025-306
where on the board do i find the IABCxxxxxxxx numbers.

a friend brought over his dell computer that won't boot details about this board is below. i need the bios and manual for this board. it uses a pentium iii processor. the layout is similar to a intel CA810E except there is no onboard sound on this board. dell intel pentiii 4 pci ps2 key and mouse 2u...

i need to identify this board so i can upgrade the bios and get the manual . this board uses a pentium ii cpu and ab-pr5 is printed on the motherboard. other info are below.

2 dimms
4 simms
3 pci
4 isa
at power supply
2 serials
1 ps2 mouse
award bios v4.51 pg
03/13/97-i430vx-ali5123-2a59ga1ac-2s

i have a pc chips m537 motherboard i need the bios update for this board. i did not find it on pc chips website.

i need the bios update for this motherboard.

award 4.51
02/16/00-mvp3-586b-ite86-2a5leh2bc-00

3 pci
3 isa
2 dimms
2 simms
1 agp
at & atx
at keyboard

bios date 07/12/2001 s version 1.21.05
it says Athlon4 when booting up. if i choose 1533MHz in the bios i have restart problems. i have to unplug power to get it so bootup.

cpu freq is set to 133Mhz and Memory to 133MHz but it still don't see 1800+. i am using pc 133 memory.

i have a pc chips m810lmr rev 5 motherboard and i am using a xp 1800+ cpu, the computer only sees 1150mhz. i tryed setting the bios the cpu freq is set to 133Mhz but it still cant see 1800+. cand this board see xp 1800? how do i make see 1800+?

i need the manual for this board. can anyone identify it.

02\16\00-mvp3-586d-ite86-2a5leh2bc-00

3 isa
3 pci
1 agp
2 sim 2 dim


award 1.0






gorgans@msn.com

no i did not save the original bios. the flasher that i downloaded FLASH634 did not give me the option to save the original bios. i have used all those same upgrades before without any problems.

yes i am sure that i have BCM SQ578 board. i tried renaming the rom file to amiboot.rom and holding the ctrl and home key with a clean floppy in floppy drive with only amiboot.rom file on it here is the result after flashing. ""main processor :amd k6(tm)/300" "processor clock :333mhz" "checking nvra...

i think that the flashing went bad, i used that same file to upgrade the bios without any problems before, then i put back the original bios code back on the bios. then i upgrade again. i did not get any error messages when flashing but i think something went wrong. is there any way that i can flash...

i tried all the clock frequency jumper settings but i had no luck, all i get is this

"main processor :amd k6/"
"processor clock :pr"
"checking nvram ..."
"hit del to enter setup"

is there any that i can reverse the bios upgrade?

i was trying to upgrade my ami bios for my sq578 motherboard, i made a startup disk and placed the rom file and the flash utility on floppy. i boot up and ran the flash and upgrade the bios but when i restart the computer it can't see the processor speed ,it says "main processor :amd k6/" "processor...

does anyone knows this motherboard. it has a 1996 ami bios and the bios string is 51-0318-001259-01111111-071595-sis5582-007_66_sis5582- h SQ578 IS PRINTED IN ONE CORNER OF THE MOTHERBOARD. IT ALSO HAS FEATURES BELOW 4-72 pin SIMM slots 3 PCI Bus slots 4-16bit ISA slots 2 dimm slot AMI 1996 SIS 5582...