BIOS Updates forum

I have posted a reply to the issue stated in post; http://www.wimsbios.com/phpBB2/topic7497.html#49652 However, as it is dated, I have started a new thread I have the same issue only with a 512kb rom image and an 4Mb Intel FWH There are two versions of the firmware I would like to check for uCode pa...

I have the same issue only with a 512kb rom image and an 4Mb Intel FWH There are two versions of the firmware I would like to check for uCode patches. Both images are AMI BIOS as with; v1.3 Program: eSupport.com BIOS Detect v1.2 July 21, 2003 BIOS Date: 10/28/99 BIOS Type: American Megatrends BIOS I...

I may have resolved this issue. Will report back once established fix has worked. First, the bios image (v1.3) as came with the board had a number of uCode patches. One of these i.e. CPUID 0F43h, Revision 0x04 11/01/2004 does not appear to exist. In fact, the correct patch should be; CPUID 0F43h, Re...

Ok, I got the BIOS string of the BIOS the mobo came with is; 03/02/2004-SiS-661-6A7I4E1AC-00 The version string is; Version String: SF2/SiS661FX Version 1.30(DX) 03/05/2004 I obtained these via bit14 - useful tool. Being as the physical label on the BIOS device detailed; SF2/661FX 013028 v1.00 (DX) ...

Rec'd this dead. Put new PSU in. With POST Card I get CPU reset. I do not know if this mobo has the correct BIOS as BIOS does not load. It may be a bad flash - dunno. I see retail BIOS available from ECS i.e. v1.0c. This being an OEM PC, the installed BIOS image filename is SF24302X.bin I obtained t...

Cp thx, I have reviewed the link at Fab 51 and acknowledge your comments. Well... The AXMA2600FKT4C - Athlon XP 2600+ Barton 2000MHz 15.0x 133MHz 1.65V is seen as a desktop replacement processor as it is not a LV model. Simply.... as the mult by mobo DIP SW maxes at 12.5 mult. I used crystalCPUID to...

CPU upgrade issue. Sorry can't attach jumper settings from manual. I purchased a mobile Athlon XP with a Barton Core Model # - AXMA2600FKT4C Installed in the mobo and posts as a Mobile Athlon 800MHz The mobo auto detects the part at six times multiplier. The mobo has DIP switches for setting the FSB...

Recd this mobo dead. The mobo had a number of vented caps. Replaced all the bad caps and checked remainder with ESR meter. Powered up mobo with an Athlon XP 2600+ (AXDA2600DKV3D) I installed an Infineon 512MB PC3200 DIMM The mobo has award bios 20040729 - 8rda4729.bin I found the battery dead as the...

Was formerly used with a Bestec ATX-250-12E Rev F1, these have no overvoltage protection. Have tried to start with known good PSU which does not have an on/off switch Symptom - PS-ON will not go low. The mobo front panel header for Power on will not start mobo. Took reading with mmeter across the tw...

Apologies if off topic This is a Trigem Mobo. It is Intel 845 chipset. I cannot find any details on CPU support but have found a BIOS update for the OEM, in this case, a company called Advent. The system is an Advent 3316. The system came with a s478 Northwood 3000/533/512 SL6S5 Will it support Nort...

This is dead and has an nForce2 chipset. Have made an image of the BIOS on the mobo As it is a Phoenix BIOS, using a hex editor, the BIOS can be seen to be a Trigem Advent Series 7 type. I have discovered this board to be used in the following Advent Desktop PCs; 1. Advent 3317 2. Advent 3617 3. Adv...

Apologies if I am off topic This mobo is completely dead - rec'd this way. As mobo soft-start does not even does not initiate, I suspect +12v line dead. PSU known good, RAM known good, CPU known good. This mobo uses an Intersil ISL6556CBC PWM IC and is appears to be based on the Intel VRM/VRD 10.x s...

I have established, what appears to be a French company called Comeback sells or sold Asrock 775V88+ as a CM-775V88+ see see http://www.comeback-pro.com/index.php? No sign of a OEM BIOS however. Also, if it is going to be any help, the BIOS chip has a label - P1.30.9B. I assume the board originally ...

Hi I have changed the PSU to; XPower ATX-500TD PSU, rail ouput follows; +3.3V : 36A, +5V : 36A, +12V : 20A, -12V : 1.0A, -5V : 1.0A, +5VSB : 2.0A see http://www.xcase.co.uk/p/289103/x-power-500-wat...-pci-e-sata-.html POST Card Reports +12V - good -12V - good -5V/3.3V - good +5V - good Sys Led - on ...

Hi I have further tested this mobo with; XPower ATX-500TD PSU, rail ouput follows; +3.3V : 36A, +5V : 36A, +12V : 20A, -12V : 1.0A, -5V : 1.0A, +5VSB : 2.0A see http://www.xcase.co.uk/p/289103/x-power-500-watt-psu---204-pci-e-sata-.html The read out from the post card this time is; +12V - good -12V ...