BIOS Updates forum

Believe or not thanks to you I solved the problem, you asked me about the waranty, then I thouht ; this is a very old motherboard no waranty at all, and decided to tray ,then disconectecd a transistor which is tied to the jumper that diasbles the chassis open function...and everything's ok. Thanks a...

Well I did flash the bios, but the problem reamined, that why I Think it's a hardware problem.

Thanks

My asus P5rd2-vm keeps showing ´case open -sistem halt ´ Then I press f1 and the PC boots ok, but i'd like to solve it: What i have to say: -The jumper to disable this fuction is in its place. -This option is disabled in the setup I disable it my self. I think it's a hardware problem, then I wonder,...

How can bypass the chassis intrusion function in my asus p5 rd2 vm?

Is there any patch?

Any help will be apreciated

Hi!

Is there any way my asus P5 rd2 VM to support core 2 duo processors ?

Is there any patch for my bios ?

Thanks

Ok friends.I'ts an AP43 bios version 1.61.Can this bios be flashed.

Thanks for yor time.

Luis

Hi!
I have found a 486 M.board and it's working fine , any way I'd like to upgrde it, maybe somebody knows how to find the ¨newest¨ bios version, perhaps someone can write it.

Thanks a lot

Luis

I have an Aopen Mx3s motherboard with an intel 800 mhz cpu, I've tried to upgrade to tualatin 1.2ghz but it doesnot work I wonder is it a hardware or a bios limitation ?.I'have seen mx3s-t boards that do accept this cpu.

Thanks for any help

Hi!.
Perhaps somebody can tell me what's the top HDD that my AOpen Mx3w can handle.Do I need to upgrade its bios ? What will I win?.

Thahks .

Lutaco

Thaks to SEMA GROUP.they offered me money help, they wanted to know my address but the moderators deleted it for reasons of security ,there are rules for the members of the forum and of course I'm not gonna break them, I don't wanna cause any kind of troubles, Everything's ok, I do apreciate any hel...

Thanks !.It's good to know that there's always somebody wanting to help,but you don't have to do it,evererything eaglefrank says is this way,he is right,he seems to know a lot about my country,perhaps he has been here.I know it's going to be hard but I'll buy a new Motherboard sooner or later, Any w...

No dear friend I think it's impossible because both are board soldered,non socketed.Perhaps as a last choice I could try to unsolder the chip and try to hot flash it, but in this case maybe I would need a board like BCN in620.Would'nt I ?.What is your advise ?

Thanks

Luis

Hi friends! Honestly I think I did something wrong when flashing 2a6ing5ac, first of all I did not boot with a foppy disk,but I turned on the power then before windows 95 started pressed f8 then the DOS promt only choice.So I put a floppy into the FDD drive and flashed the BIOS, but instaed of resta...

The DIMM was working on this board, then I restarted and runned Uniflash everything was ok, when finshed I restarted again ,but the board didn't boot, then got another board and tested the processor (celeron 500 mhz) it was ok, then tested the DIMM (32 Mb) but it was asummed as 16 Mb,but Windows onl...

No,I didn't get any message about the boot block, everything was a oK,even I read ¨flash successful¨, I din't flash the boot block should't the board at least boot ?, it doesn't beep, I don't feel the floppy drive spinnig, however the atx power supply does start, I'm thinking that any hardware might...