BIOS Updates forum

Hi
Well,Kachi Wachi, the manual for the M558 board which you specified proved to be the manual for my board and every info (i.e junpers etc) was right.
I managed to install the 233MMX proc and everything it's running perfect,till now... )
Thank you for all !!
Alex.

O.K. now i have and using a 1437-Hsing tech enterprise co ltd motherboard,lower in performance than mine and it's equipped with a cyrix P200 processor.Ehat i want to do is to change the proc with my proc which is a Intel Pentium 233MMX proc and it sure is better. The problem i encountered is that it...

Hello I'm back but alone!!My Pc partner motherboard after about 8 years of wonderful service has "DIED"!!!!!!!!!!! After measuring the voltage on the VPP pin and observing that it has 12V the system freezed and i restarted.Surprise:the boot block entered the scene.lucky for me i was having a backup ...

hi to all
Sorry i have been gone for a day and therefore couldn't reply.
O.K i'll see what i can do and tell you the results.
Thanks.
Alex.

Well it seems that this problem doesn;t wabt to end ,why? I looked at the manual 02 and saw that j9 and j10 are for bios operation modes.O.K. but on my MB there isn't a j9 nor a j10 and were they were suposed to be there isn't anything to name it "jumper".But there are two jumpers near the bios name...

O.K. done i've got the manual 02 and i'll give it a try tomorow and then if all good i will reply you.I am almost sure that those jumpers are not set in the mode that i need.
Thank you very much
Alex.

o.k but how to do this because in my MB manual which is also downloaded from the internet it doesn't specify enything about any jumper which sets the flash voltage .If you find something about this please tell me how to locate this jumper and how to modify his setting.
Thank you very much
Alex.

Hello
O.K. done this what i saw:
A large MX logo and next to it this:J9731
and beneath all this logo and code the folowing numbers:
28F1000PPC-12C4
M11757
Hope this will help you.
Thank you very much for your efforts.
Alex.

Hello all problems still are .I used the drdos bios flash startup disk creator and no more insuficient memory msg.now what is happening: -with award flasher version 5.53A it's like that:it displays the flash type as 2F8010/12V and when i hit Y for the programing process to begin it shows ERASE CHIP ...

Hello Still having problems!!I tried with the program from bootdisk.com with bootdisk98,bootdisk98c and winboot and still having that error msg telling me that the memory it's insuficient. What i observed was that when i typed the name of the flash file without the extension it didn't showed any err...

Hello all This is my bios info: BIOS Manufacturer : Award Modular BIOS v4.51PG BIOS ID 08/14/97-i430VX-ITE8680-2A59GV3EC-00 BIOS Date : 08/14/97 BIOS OEM Signon : BIOS-I (70814B) BIOS ROM Size : 128K Chipset : Intel Triton 430VX rev 2 Super I/O Chip : ITE 8679 or 8680 found at port 279h i installed ...

hello again Well nothing wrong happened but i was unable to udate the bios.Why?because it keeps saying insuficient memory in the error msg box. I used a bootable floppy to which i made a copy of the patch file and the awdflash version 7.41 program.Do i did something wrong?And to what memory does thi...

Hello all Thank you for the link very kind of you.I will now try to see what happens if you will not see any message here in an hour or so then something bad happened and if you'll see then everything it's o.k. And yes the MB it's corectly identified it's a Pcpartner MB520NH.Sorry for not writing th...

O.K. then i will post here everything i've found on this bios including mother board manufacturer everything i can find.
Thank you.
Alex
P.S.:the code that i post it in the subject of the post isn't enough?

i already checked the pc partner which seems to have the bios file for this bios but it's the same with the actual bios that i have.I need a file that could make my bios see the entire hard rive and not only max.8GB
Thank you for the help and here is my mail address:nicolae788@xnet.ro
Alex.