BIOS Updates forum

adax.pl site is... dead. I talked to shop-asistan - he told me the web adax site does not work.
I am unhappy to have AMI bios at all... B-(
Tomasz.

I downloaded from this:
http://www.frazpc.pl/sterowniki/down_free/3206
for 1 PLN + 22%VAT... B-)
but it is AWARD bios file.. not AMI! It is right for my mobo?
OK, so, I will send You original AMI bios via email...
Could You hack it for me???
TNX a lot!
Tomasz, POLAND.

My PC with AMIbios: 07/15/95 American Megatrends (C) 1996 Mar.20 1999 61-1229-001252-00101111-071595-440BX-1440B000 Mar.20 1999 Intel BX/ZX Celeron – 333MHz NVRAM Intel 440BX/ZX rev 3 ITE 8671 rev 1 found at port 279h and fatal with parallel port params: only ECP+EPP, HP LJ 1200 does'n work good... ...

Any right link to Realtek site, please..?
That ATMEL chip is an EEPROM, isn't it?
It Could'nt be flashed via PCI card with floppy disk... or am I wrong?
Tomasz.

I flashed ATC-5000 with the new BIOS from www.rainbow-software ( Mr Rainbow - TNX, it works good). Now I set onto that mobo IrDA with the cable to the original pins, and want to activate it. But how to set the best BIOS' settings..? BIOS' options are: 1. UART Mode: IrDA 1.0; Duplex Mode: Full/Half; ...

Is it possible to flash chip with PCI CARD..? I would like to use my NIC PCI for that... with Uniflash..
Tomasz.
P.S. The flashROM chip is:
ATMEL 28 pin's DIP
AT28C64B
15PC
0250

The first problem is gone! I found a shop with FlashROMs 28 DIP.
They cost ~2,5euro...
But the next:
-how to flash that chip..? into my NIC socket? Or into original mobo socket with "hot-flash"..? And it has 32 pins...
Tomasz.

Hi! after long time... Sorry Moderator, I do not know it is right forum for my question... The problem is: I have NIC Realtek 8029 with empty =28 pin= socket for flashrom. I would like to make it as bootable NIC for my old comp... I have tried to get info from many www sites about flashroms, but no ...

I have "SONO" mboard comp. I must change setup LPT port in BIOS.
But how to get into BIOS, it is AMI bios...?
Tomasz, POLAND.

Arkadiusz - congratulations with Your 80GB hdd!
I told You They are the best..!

KachiWachi: private letter sent with maxtor hdd's jumpers_settings.

Tomasz, POLAND.

How to attach pisc to my letter to this forum..? I could attach pisc about jumper_setting "style A" and "style A1" for my Maxtor hdd - difference will be showed.
kachiWachi: lesson number TWO: do not trust manufacturer's original labels!
Tomasz, POLAND.

KachiWachi: You are the GREAT! I followed Your link to maxtor website, check JUMPER_SETTINGS at hdd and... that's it! Previous I trusted manufacturer, always set jumpers as it was showed at the label onto my hdd. There were 4 pics at the label: master, slave, cable_conn and CLJ. The jumpers_settings...

Could You please link for BIOS 6VIA81P v.C ?
And really - full-screen logo was white, blazing my eyes with special info...
Tomasz, POLAND.

Support hdd >=40GB for "Sono" mainboard needed! Info made by Biosagent: BIOS Date: 07/15/95 BIOS Type: American Megatrends BIOS ID: 61-1229-001252-00101111-071595-440BX-1440B000 OEM Sign-On: Mar.20 1999 Intel BX/ZX Chipset: Intel 440BX/ZX rev 3 Superio: ITE 8671 rev 1 found at port 279h Tomasz, POLA...