Search found 20 matches

by trysting
Sun Aug 04, 2002 11:51 am
Forum: Other BIOS update issues.
Topic: Flashed BIOS and this error message comes up.
Replies: 9
Views: 5915

Sorry I guess I should have listed a bit more info for this. The setup of the system is basically the Jetway 867AS-H M/B, MSI GeForce 2 MX/MX 400, 2x 128 MB RAM (Memtek brand I think), CD-ROM, Western Digital 20 GB HDD, AMD Duron 1200 running Windows 98 SE. The reason for flashing the BIOS was that ...
by trysting
Sun Aug 04, 2002 10:40 am
Forum: My hard drive isn't recognized
Topic: 40GB: MS-6163
Replies: 9
Views: 7729

Well a bit more info would have been nice (like motherboard manufacturer, CPU, BIOS Version etc.) But if it is an MSI board it could be in this list :
http://www.msi.com.tw/program/products/ ... E=Archives

Make sure you get the right one though.
by trysting
Sun Aug 04, 2002 10:18 am
Forum: Other BIOS update issues.
Topic: Flashed BIOS and this error message comes up.
Replies: 9
Views: 5915

Well that message comes up after the POST. You see it test the memory and then detect all the drives then it only just flicks up the next screen (the one where you see what memory slots are used and what PCI cards are detected) and I mean only just flicks up as I only recall seeing it for less than ...
by trysting
Sun Aug 04, 2002 3:09 am
Forum: Other BIOS update issues.
Topic: Flashed BIOS and this error message comes up.
Replies: 9
Views: 5915

No. It all seemed to have flashed well with no errors reported at all. but then upon reboot it came up with that message. I have since flashed in an earlier BIOS revision (A02) as there were problems with the A03 release. I have also emailed Jetway about this problem but doubt that I will get a resp...
by trysting
Wed Jul 31, 2002 12:52 am
Forum: Other BIOS update issues.
Topic: Flashed BIOS and this error message comes up.
Replies: 9
Views: 5915

Flashed BIOS and this error message comes up.

I just recenctly flashed the BIOS on a Jeytway 867AS-H (Rev. 3.0) from the original A01 (01/04/2002) to the latest A04 (07/22/2002) and now when the system is booted it loads up a bit then it pops up this message box that says : Invalid copy! Press any key to continue... : Now if you press any key i...