Search found 99 matches
- Tue Apr 16, 2002 6:51 am
- Forum: What does this BIOS or Jumper setting do?
- Topic: BIOS SETTINGS AFTER FLASH
- Replies: 2
- Views: 4157
- Mon Apr 15, 2002 5:15 am
- Forum: What is my motherboard?
- Topic: two no-name socket 7 boards
- Replies: 12
- Views: 8296
You could try to replace the bios with a custom chip.... But, I doubt that it would run stable in the 200mhz FSB range as the rest of the motherboard components are not geared for it. A good example would be AGP if has one or ever tht I/O controller and of course memory is key. As general rule we st...
- Sun Apr 14, 2002 4:23 pm
- Forum: My hard drive isn't recognized
- Topic: Samsung 60 GB hdd SV6004H with Zida (AMI) mbd seen as 32 GB
- Replies: 5
- Views: 5829
Some of the associates of this forum are testing a mod that may work. But, at this stage it is a bit dangerous and is not someting the average PC User can do. I would go for a add in card... They can be had for les than $30 in sosme places - like the US. Look at www.pricewatch.com
- Sun Apr 14, 2002 4:19 pm
- Forum: What is my motherboard?
- Topic: Compaq Presario 5686
- Replies: 6
- Views: 5747
Just what is it that you want to do? But, it doesn't really make a difference who made the motherboard as it is a cusom build to Compaq's specs and more than likely ONLY a Compaq bios upgrade will work. I worked for Dell and we went through the same thing. Some of the early Demension boards were pur...
- Sun Apr 14, 2002 6:12 am
- Forum: My hard drive isn't recognized
- Topic: Samsung 60 GB hdd SV6004H with Zida (AMI) mbd seen as 32 GB
- Replies: 5
- Views: 5829
- Sun Apr 14, 2002 6:01 am
- Forum: Other BIOS update issues.
- Topic: 80gb harddrive install
- Replies: 3
- Views: 4346
- Sun Apr 14, 2002 5:55 am
- Forum: General BIOS Questions
- Topic: no video on a new video card... HELP!
- Replies: 10
- Views: 7101
Did you set your video to standard VGA and test it before deleting the old drivers, removing the old card and installing the new card? 1) set to std vga, reboot and test 2) uninstall the old video drivers, reboot and test 3) delete the card in the device manager (if it still there), reboot and test ...
- Sat Apr 13, 2002 4:11 am
- Forum: What does this BIOS or Jumper setting do?
- Topic: BIOS SETTINGS FOR MY ECS K7S5A BOARD
- Replies: 3
- Views: 5418
- Sat Apr 13, 2002 4:03 am
- Forum: My hard drive isn't recognized
- Topic: 75GB Hard Disk with Award Modular BIOS v4.51PG
- Replies: 12
- Views: 9343
I think you have hit the wall with the bios... I would look at a EIDE card first. Check www.pricewatch.com.
- Sat Apr 13, 2002 4:00 am
- Forum: My motherboard is dead
- Topic: HI!!! need some help please!!
- Replies: 1
- Views: 3310
- Sat Apr 13, 2002 3:53 am
- Forum: Notebook BIOS and other problems
- Topic: dell-phoenix bios
- Replies: 1
- Views: 6082
- Fri Apr 12, 2002 5:40 pm
- Forum: General BIOS Questions
- Topic: i got 2 A-open ap5t 3.1 with out a bios chip
- Replies: 2
- Views: 4091
Check the A-Open site to make sure what chips it supports and then go to a local shop or search the net to purchase a couple. Next you need to get the bios loaded.... You can hot swap and update the chips if you have a system that has a compatibale chip, get a local to program via eeprom programer o...
- Fri Apr 12, 2002 5:35 pm
- Forum: What does this BIOS or Jumper setting do?
- Topic: BIOS SETTINGS FOR MY ECS K7S5A BOARD
- Replies: 3
- Views: 5418
Try this site...... http://forum.ocworkbench.com/ocwbcgi/ul ... 4&t=001477
- Fri Apr 12, 2002 5:24 pm
- Forum: My motherboard is dead
- Topic: Gigabyte BX-2000
- Replies: 3
- Views: 4717
- Fri Apr 12, 2002 5:21 pm
- Forum: General BIOS Questions
- Topic: BH6 Quirk
- Replies: 4
- Views: 5003
I have a BH6 Ver 1.0.... latest bios is SS and the Version 1.1 is SP. So, check to see which version you have. I beleive the version number is printed on the motherboard between the PCI/ISA slots. There have been reports of weird happenings when the wrong ver of the bios is installed. Many have trie...