BIOS Updates forum

990305s.rom is a BIOS upgrade for the M571 Motherboard. You run the flash program and tell it to use that file to update your BIOS.

Did you update to the 715v3 or 715v1.2 BIOS?

http://www.wimsbios.com/~ajzchips/

Dude I am a Sens fan all the way.

Though I am pretty sure Carolina is gonna win this year....especially after the 8-2 pasting they gave Montreal.,..

The file you downloaded from Abit contain file(s) zipped into it. Run the File and Extract them to the floppy along with the flash program.

Yep I know your other sig from the other posts online.
Thx for the welcome.

Hopefully I can be as useful here.

The design of motherboard is completely propriatary, not standard ATX.

I have some information with reguards to jumper settings, email me (ndaines@techie.com) and I will send you the info I have.

There is no way of knowing whether or not this will work. What I can tell you is that the chip and board were not altered in anyway. The BIOS was just flashed with the Compaq version.

Try loading the BIOS defaults and clearing the CMOS jumper.

Hopefully its not much more complicated then that...

You could also try reseating the RAM just in case. Also try building the system outside the case to illiminate the possibility of a short.

The DTK PAM-0050SE is an OEM version of the Gemlight board you mentioned.

Manual download:
http://www.dtk.com.tw/download/manual.html

The distro seems to be trying to run console or X (depending on where it is in the boot process) at a higher frequency then your monitor is capable of using. I encountered this problem when I set the console to use 1024X768 and then switched to an older monitor that was only capable of using 640X480...

The program you mentioned won't work. The EU has prevented himself from seeing anything on the screen. What you've done is disabled the current video card you are using. If its an onboard video card, you need to put a video card into a free ISA/PCI/AGP slot and boot the system that way. If you alrea...

JP3 or J3 is located near the BIOS chip. As per Part2-21C-Page 8 of the manual. C:\MTMMOUSE\MOUSE /B /N /L=GB /M=8,16 /A1 /F /R=0 Bad command or file When I did a run: msconfig, this file is showing up in autoexec.bat. I tried to delete it and when I re-booted, the error was still there and so was t...