BIOS Updates forum

Check to see if there is a jumper on JP1 - if there is none, the CPU should be auto detected (although the manual says up to an 800 Duron with a Note: The frequencies listed were those known at time of publication). If you want to set manually, then install a jumper on the pins of JP1 and set the mu...

This appears to be a 200 FSB board - what CPU are you using?

Download, install and run Everest Home Edition - this will tell you what CPU you have, as wll as all the hardware and software you have in your system. The E3 refers to the Stepping of your CPU - there are several Semprons with E3 stepping. Here is the link: http://www.lavalys.hu/products/overview.p...

My own experience with Western Digital drives is that if it is the only drive on the IDE controller, it should be set to "Cable Select" as well - so, if you don't have another drive connected to the ribbon cable, set the jumper on the drive for CS (Cable Select).

Have not found the board manufacturer or manual, but here are a couple of support links:

http://www-307.ibm.com/pc/support/site. ... IGR-4HDPPT

http://www-307.ibm.com/pc/support/site. ... 4D4KB9#via

You have a PcChips M810LR V3.0, a good support page here:

http://radel.inet.net.nz/m810lmr.html

This appears to be an Abit NF7-S, compare with this image: http://www.abit-usa.com/images/products/NF7_S_large.jpg BIOS can be downloaded here (caution, there are versions 1.x and 2.0 of this board): http://www.abit-usa.com/downloads/bios/bios_revision.php?categories=1&model=6 Also, there is an NF7 ...

The manual for this Biostar board can be found here:

http://www1.biostar.com.tw/support/manu ... 3?socket=a

Gigabyte GA-5AA motherboard, support here:

http://www.giga-byte.com/MotherBoard/Pr ... A-5AA.htm#

To the right of the CPU socket there is a small round sticker with the number 3 printed on it. What is the full number on the edge of the board above the sticker that ends with F-3.00?

You can download the M860 manual here:

PcChips M860 Manual

The BIOS can be downloaded here:

http://global.shuttle.com/download/download.asp

A word of caution - there are 3 versions using this motherboard, so choose the one to match your system. There are instructions for using Winflash or DOS to upgrade the BIOS on their site.

Check the date - this is the BIOS that you currently have.

Yes, all boards in the 7ZMM series have the same pinout for front panel connector J11.

Gigabyte GA-7ZMM manual can be found here (and will likely cover the GA-7ZMMP as well): http://www.giga-byte.com/Motherboard/Support/Manual/Manual_GA-7ZMM.htm The Tiny system would not likely come with a motherboard manual, only a system user's manual. Compare the information in the manual with your...