could GA-8SIMLH Rev 3.x work on 1440x900?

Video, SCSI, modem, CDROM/CDR/CDRW, etc.
Post Reply
hawk
New visitors - please read the rules.
Posts: 5
Joined: Wed Aug 13, 2008 8:17 am

Hi there,

My PC's motherboard is GA-8SIMLH Rev 3.x. Recently I got a 19" LCD panel (1440x900) and it just has 2 options to choice 800x600 and 1024x768. After Installed LCD's inf, there are 2 more options 1280x700 and 1280x1024, but there is no 1440x900 to choice.

The SIS web said Sis651 can work on 1440x900 if the vBIOS version is upper than 2.28. So I upgrade the Sis driver to 3.73:
http://driver.sis.com/graphic/igp/uniVGA3/uvga3_373.zip

and motherboard BIOS to F12:
http://www.gigabyte.com.tw/Support/Moth ... uctID=1399

but the vBIOS version stops on 1.12.

if anyone would help me out here, much appreciated.
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

read the sticky thread in this section and get the patched bios from the download page (link is inside the sticky thread!)
If you email me include [WIMSBIOS] in the subject.
hawk
New visitors - please read the rules.
Posts: 5
Joined: Wed Aug 13, 2008 8:17 am

I download the patch BIOS and use the Q-Flash (a utility in BIOS) to update BIOS. After updated and reboot then the PC B----B-B- (1 long then 2 short beep), passed 3 seconds I got 1 beep and the PC restart.

But the PC just shows 640x480 resolution and I have to re-setup then SIS 3.73 driver. And I still have not 1440x900 option to choice.

What step do I lost?
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

please check the vbios version to make sure the bios update really worked.
If you email me include [WIMSBIOS] in the subject.
hawk
New visitors - please read the rules.
Posts: 5
Joined: Wed Aug 13, 2008 8:17 am

The vbios version is 1.12.05.

Or I can't update then BIOS via Q-Flash?
hawk
New visitors - please read the rules.
Posts: 5
Joined: Wed Aug 13, 2008 8:17 am

Could the BIOS of Gigabyte 8SIMLH(-P/-C) 1.x/2.x/3.x work on 8SIMLH 3.x?
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Not sure what Q-flash is but chances are it won't recognize the patched bios as a regular release bios and refuse to flash it. Use the classic update method.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

seems that you should try another method flashing the bios like edwin already suggested.

The Gigabyte update site returns the same bios files for all 8SIMLH boards upto revision 3.x, so i conclude that they are all the same :)
If you email me include [WIMSBIOS] in the subject.
hawk
New visitors - please read the rules.
Posts: 5
Joined: Wed Aug 13, 2008 8:17 am

Q-Flash is a utility in the BIOS. I can use the utility when I enter the BIOS setup.

BTW, I boot into DOS via floppy and use a flash utility to update BIOS. As same as update by Q-Flash. When reboot the PC beep B--B-B- (1 long and 2 short beep) and hangs 3~5 seconds (I'm afraid it kept on the black screen) then beep B-(1 short beep) and boot correctly. But the vBios version still is 1.12.05.
Post Reply