Just got a NV7-133R and Can't Boot

Video, SCSI, modem, CDROM/CDR/CDRW, etc.
Post Reply
steve
New visitors - please read the rules.
Posts: 3
Joined: Sun Sep 01, 2002 3:58 am

I jsut finished putting together a new machine with a NV7-133R motherboard and it won't boot. At first I had difficulty getting the video (Gainward GeForece 2 MX 400 w/ 64 MB) to work. I had to clear the BIOS a couple of times. Finally, started working and then I started to load the OS (XP) and it crashed at the last stage (some kind of page error - I think). Anyway tried to restart the process and had similar difficulties getting video to work. Cleared BIOS again and now the system doesn't seem to recognize anything (no POST codes or anything). Could I have completely corrupted the BIOS?
Top
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:
Contact Rainbow

Is your memory and CPU OK?
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Top
steve
New visitors - please read the rules.
Posts: 3
Joined: Sun Sep 01, 2002 3:58 am

Not sure! Going try and get a new CPU today and maybe some memory.
Top
steve
New visitors - please read the rules.
Posts: 3
Joined: Sun Sep 01, 2002 3:58 am

Tried new CPU and memory still does not work. Also, checked the memeory, CPU and graphics board in another system. Any other thoughts?
Top
Post Reply

Return to “Video (VGA) and other BIOS/Firmware”