Video resolution problems
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
Go to http://www.eizo.com/downloads/ICC/index.asp and download the F35inf.exe file. This should install the proper information to Win98SE, though with DDC, Windows should have grabbed the information from the monitor already.
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
Thanks very much Kachi Wachi.
I done it and now Eizo F35 is recognized!
But nothing happens...
I mean that image quality remains low (for example a black straight line appears composed of a sequence of points ) and if I set the screen resolution at 1024x768 (as supported by the monitor ) now the image enlights the full screen but appears "small"...
Desperate...
I done it and now Eizo F35 is recognized!
But nothing happens...
I mean that image quality remains low (for example a black straight line appears composed of a sequence of points ) and if I set the screen resolution at 1024x768 (as supported by the monitor ) now the image enlights the full screen but appears "small"...
Desperate...
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
Is the Display Adapter Refresh Rate set for "Optimal" in the Device Manager?
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
You can try "Optimal" and see what happens.
Other than that, perhaps there are controls on the monitor itself to "adjust" things...see if any of those helps.
Other than that, not much else to try...except maybe that you got a "bad" monitor".
Other than that, perhaps there are controls on the monitor itself to "adjust" things...see if any of those helps.
Other than that, not much else to try...except maybe that you got a "bad" monitor".
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
Hi guys,
Finally I solved !
I just forgotten to update the screen resolution after the driver installation.
Now it runs very fine!
Thanks to You Kachi Wachi: your suggestions has been crucial.
Thanks also to everyone adviced/suggested me in this thread.
Very grateful guys.
Much good luck!
Finally I solved !
I just forgotten to update the screen resolution after the driver installation.
Now it runs very fine!
Thanks to You Kachi Wachi: your suggestions has been crucial.
Thanks also to everyone adviced/suggested me in this thread.
Very grateful guys.
Much good luck!
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
NP...glad you got it working!
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).