Page 1 of 1
BIos, help me please
Posted: Thu Sep 26, 2002 9:01 pm
by pureevil
My bio settings have one up the wall, eveerything wasfine, then my son got into them and messed them up, Ithink I have everything working, but I now can't lcate my modem, and when I boot up I get a port conflict i/o ICQ 3
I have no idea whats happened please someone help
Posted: Thu Sep 26, 2002 9:54 pm
by Denniss
Internal Modem or external ?
Tried to load Setup Defaults in Bios ?
Posted: Thu Sep 26, 2002 10:40 pm
by pureevil
Internal and yes tried to load setup defaults
Posted: Fri Sep 27, 2002 10:30 am
by NickS
Look at the COM (serial) port settings in the CMOS. Are they set to Auto ? IRQ3 is a COM IRQ which may be used by both on-board serial ports and an add-in modem. If they are not set to Auto you may want to try that. Alternatively, if you do not need the COM port/ports, disable it/them in the CMOS.
Posted: Fri Sep 27, 2002 1:23 pm
by pureevil
i'll try that, but isn't there just a basic setup that I can copy
I can'tfind a page that will show me one,
I just need to see who it should be seup normally, then I can copy it
