Posted: Mon Mar 10, 2003 11:59 am
Ah, I won't offer to flash it for you then.Unrealll wrote:NickS: I live in Canada
As far as I know, connect PLCC pin 1 to DIL pin1, etc. I have bought a PLCC socket so that I can make my own PLCC_DIL adapter but I have not found time do do it yet. A professionally made adapter varies in cost here, from about 15 UKP upwards.Someone knows where I can find docs on how to build my own home made PLCC adapter?
I'll pass on that, as I have been fortunate enough to have access to professional equipment until recently. Now I use an old motherboard, like joegib.except the c't flasher, which "flashing device" would you recommend? (for around lets say 60 to 100$ max (us dollars or euros)? And which one offers the best software included?
Yes. Are you sure there aren't buffers on the board you could use ? I have an ISA protoyping board somewhere and I have thought I might build one myself - another task with insufficient priority while I can flash in this old motherboard.Last question: do you think I can build a c't flasher COMPLETELY by myself (without having to buy the full pre-fab kit) from an old ISA board I will convert (I'll use an old ISA board to have the right thickness for the board but EVERYTHING was removed from this board, except the contacts for the ISA slot, I will need them, of course)?
I thought they were when I last checked, but maybe I'll take another look.There are some schemas on their website that apperently shows the conception of the board. Are they complete?
Perfectly adequate, in my humble opinionP.S. sorry if my english is not fully elegant, this isn't my native language...