Page 1 of 1

QDI Advance 9 motherboard

Posted: Sun Nov 23, 2003 11:45 am
by JEN
Hello

Does anyone know if the QDI Advance 9 motherboard supports the following celeron coppermine processors running at 566MHz

1. SL3W7
2. SL46T

Thanks for any info :)[/url]

Posted: Sun Nov 23, 2003 12:25 pm
by edwin
maximum multiplier is 8x so 533. the 566 has a bus/core ratio of 8.5

although the voltage is OK (the board can use 1.5V core processors), chances are it doesn't recognize it as such.

Posted: Sun Nov 23, 2003 2:00 pm
by JEN
Thanks, you just stopped me from making a mistake :D

Posted: Sun Nov 23, 2003 3:57 pm
by Rainbow
I've successfully tested Celeron 600 in Advance 5/133 board with the latest BIOS.
What's more, there's clearly written on that QDI page:
Support Intel Celeron CPU at 300A/333/366/400/433/466/500/533/566/700/800MHz

Posted: Sun Nov 23, 2003 5:47 pm
by JEN
I dont get it?

The cpu im interested in needs a multiplier of 8.5, as this motherboard can only go upto a multiplier of 8, how can it support the 566 or even a 800 ???

Posted: Sun Nov 23, 2003 5:53 pm
by ajzchips
Don't worry. Multiplier settings for the P2/P3/Celeron are useless, since you can only alter them on "unlocked" versions or engineering samples.
Your cpu will work at the factory-set multiplier, even if it's 9.5, 13, 27, whatever.