Page 1 of 1
Custom Bios Flash
Posted: Thu Jan 22, 2004 2:27 am
by rodgo
Is it possible to setup a custom Bios flash so when you flash th emotherboard it automatically set's all the drives to none? any assistance anyone could give would be much appreciated.
regards
Posted: Thu Jan 22, 2004 4:02 pm
by KachiWachi
What are you trying to do??
Posted: Thu Jan 22, 2004 4:33 pm
by soupy
With Award BIOS you can modify the default settings using MODBIN.
You'll need to disable both IDE channels rather than set drive types to none, though, since CD-ROMS will still be detected, at least in some cases.
Posted: Fri Jan 23, 2004 3:12 pm
by rodgo
so using modbin i can diable the ide devices within award bioses? what about setting a bios password? can this be done using modbin?
thanks
Posted: Mon Jan 26, 2004 4:39 pm
by soupy
You'll have to experiment. On mine I can change the "security default password", and change the "Security Option" from Setup to System, but I'm not going to start flashing to see what works and what doesn't.
