Posted: Tue Mar 23, 2004 12:53 am
The card should be configured for diskette on 3F0-3F7 and IRQ 6. Does the drive seek/step, and does the motor come on ?
A forum to ask questions about bios updates, bios problems, bios settings and much more!
https://www.wimsbios.com/forum/
Its seems that your RAM or memory is not properly inserted.jiteo wrote:Hey forum!
I am back! Some might remember my post "Uniflash: 2 chipsets, 2 chips" in the BIOS Utilities and Flash Programs section. Well I did the hot-flashing, flashed the upper half of the chip, and booted with the newly flashed chip.
Long beep, two short beeps, pause, beep, beep, beep, endlessly. From what the Internet tells me, long beep, two short beeps means video error. The beep, beep, beep, endlessly there seems to be less of a consensus on. Now since I flashed only the boot block correctly, I want to know whether that's a common issue, since the boot block BIOS only supports ISA video cards. I do have and ISA video card in there, but there are some other pins on the card that go into some other slot, so it might not be "pure" ISA. Any ideas?
enjoy!
Artom