Page 1 of 1
Updating ESCD.... and nothing happens
Posted: Mon Sep 27, 2004 3:32 pm
Pentium MMX200 with Award BIOS modular version 4.51PG.
I fitted an PCI 56k internal modem and when I switch on I get the BIOS message: "Updating ESCD... " but nothing happens. In BIOS settings I can not find any option to flush, reset or disable ESCD. Any help?
Posted: Mon Sep 27, 2004 6:06 pm
What happens if you remove this PCI Modem ?
Is your Bios Write Protected by Jumper or Bios-Option ?
What's your Board ?
-> manufacturer/model and Bios date/Revision
Posted: Tue Sep 28, 2004 7:18 pm
When I remove the PCI modem all is normal OK.
I have no idea if the bios is protected or not and I do not know how to find it.
My board is DFI G586SPA rev.A with SiS 5511 chipset. and my dios is Award v4.51PG
Posted: Tue Sep 28, 2004 10:49 pm
You may want to update your Bios to try .
But I believe it's something with PCI compatibility - your Board should have a PCI Bus Rev 2.0 and most never carrds require at least PCI 2.1 or 2.2 and that's not upgradeable .
If you need a Modem use a serial port modem
Posted: Tue Sep 28, 2004 11:34 pm
Posted: Sun Oct 03, 2004 12:40 pm
If you use an external modem, such as serial, or I prefer USB, you are not limited by the PCI revision, as then you obviously do not use these slots.