Page 1 of 1
Ribbon cable clip
Posted: Fri Feb 03, 2006 10:17 am
by ross_slaven
I have a problem. I took apart our compaq nx9010 to fix the a/c adapter. Long story short, while I was taking it apart I broke the plastic clip that holds the ribbon cable for the keyboard to the motherboard. Dose anyone know where I could get a new clip, or a good way to fix it otherwise. Any help would be great. -Ross
Posted: Sat Feb 11, 2006 8:45 pm
by Yaye
I don't understand how is the clip, however try to use plastic strings, like those electricians use to keep the electric cable all together: those that have a plastic jumper that don't permit to open once closed: you need to cut with a cutter if you would to open.
You can use those strings without electrician problems.
Posted: Wed Jun 07, 2006 3:47 am
by rwilliams
to Ross - I have the same problem. I've contacted HP/Compaq (and a dozen local computer repair shops) - but no luck. The guy at HP suggested a new mother board (I hope he was joking). Someone suggested a piece of credit card wrapped in cardboard - but right now I'm using the broken clip and hoping the ribbon cable stays put (my clip just has one of the side pins snapped - so the interference fit with the ribbon cable is still good).
Let me know if you unearthed any better solutions.
Good luck
RIch.
