Page 1 of 1
20GB: ACorp 06/21/96-i430VX-W877F-2a59G000C-00
Posted: Sun Jul 14, 2002 2:48 pm
by pilva
Dear sirs:
I would like to install a Fujitsu MPG3204AH into an ACorp motherboard with that BIOS ID. Could anyone have the solution for this? I´ve gone to the ACorp webpage, with no help...
Thanks a lot!
Regards from Portugal
-=Pilva=-
Posted: Sun Jul 14, 2002 9:17 pm
by Rainbow
Posted: Mon Jul 15, 2002 12:17 am
by pilva
Nop, it is an ACorp PT-5IVL...
BTW, thanks a lot for replying!
-=Pilva=-
Posted: Mon Jul 15, 2002 1:05 am
by Rainbow
It's Azza Pt-5IVL OEMed by Acorp. Manual
http://www.azza.com.tw/FTP/Manuals/5IVL.PDF. Some BIOS is here
http://www.azza.com.tw/FTP/BIOS/5IVLWP.ZIP
08/21/97-i430VX-W877F-2A59GP8AC-00
Try it (be sure to back up your current BIOS first) - it should detect the drive correctly but some of these old BIOS will not support over 8.4GB even when they display everything OK. Run FDISK (from Win95OSR2 or later) to see if it shows full HDD capacity.
Posted: Mon Jul 15, 2002 5:46 pm
by ajzchips
Acorp seems to have newer BIOSes for certain oemed boards. I've just discovered (and rejoiced) that recently with my REDFOX board (oemed by AZZA and Acorp).
BIOS no good...
Posted: Tue Jul 16, 2002 9:53 pm
by pilva
Dear sirs:
What I came up with was:
FLASH MEMORY WRITER V7.37
(C)Award Software 1999 All Rights Reserved
---------------------------------------------------
For i430VX-W877F-2A59G000C DATE: 06/21/96
Flash Type - Unknown Flash
File Name to Program : 5ivlwp.bin
Checksum : 32B7H
Error Message: (blinking) Unknown Flash Type!
What now? Give up?...
Posted: Tue Jul 16, 2002 10:01 pm
by Rainbow
Try another flasher - older Awdflash or UniFlash (at your own risk).
