Page 1 of 1
504MB+: 2A5UI000-00
Posted: Mon Nov 11, 2002 9:55 pm
by ekaeka
Hello,
I'm not very good in English so I hope I write this good so you
understand it.
I want to flash or update my bios from a old pc (AT&T Globalist)
because i want to install a harddisk from 2,5 G..
My bios only reconized up to 504 Mb.
This is what i have found.
Award bios V.4.50.G
Bios 1.02.00
Opti 82c596/597
2A5UI000-00
board PB5500c (66Mhz) pentium I.
I hope You can find the right flash or Bios...i can,t find it because the (000-
00) number so i can,t fins a manufactor/developer
I hope you can help me.
Thank a lot,
Greetz...Ernst Kooij
Posted: Mon Nov 11, 2002 10:08 pm
by NickS
Can you give the complete string, not just 2A5UI000-00 ?
Do you know what model Globalyst ?
Have you looked at
http://www.ncr.com/support/support_driv ... _Globalyst
Posted: Mon Nov 11, 2002 10:19 pm
by soupy
2A5UI000-00: ??? (globylyst 330 360 a 66mhz) (586 PCI S/N:AV9226034-88) (PB5500C BIOS R1.02) (S/N:TB49104058) ou PB5500C (Mitac?)
Posted: Mon Nov 11, 2002 10:46 pm
by NickS
Plasma says Mitac PB5500c - Mitac has no BIOS. See
http://www.mitacservice.com/visitor/v_fileBrw.asp
Mitac USA is no good either.
Thanks for so far..
Posted: Tue Nov 12, 2002 8:13 am
by ekaeka
To NickS.and Soupy
.
The string is the same as the one from soupy(If that is what you mean...?)
I found that also..Tha chipset is Opti 82C822-596-597
It's a globalist 340 and i can't find it on the website.(60mhz)
they have a globalist 310-330-360 and more but no 340..
On the Mitac website i can´t find My board PB5500c..so i don´t know what to do further..
I hope You and Soupy can help me a bit more..
Thanks al lot so far and I really hope you can find something for me
Greetz..Ernst
p.s what´s the diverense between a KB-bios and a SYS-bios..??
must i upgrade them both...??
Posted: Tue Nov 12, 2002 9:59 am
by Rainbow
Re: Thanks for so far..
Posted: Tue Nov 12, 2002 11:30 am
by NickS
ekaeka wrote:
p.s what´s the diverense between a KB-bios and a SYS-bios..??
must i upgrade them both...??
I believe the difference is that one is the firmware for the keyboard (KB) microcontroller and the other is the system (SYS) motherboard. I would not update the keyboard code unless I was desperate.
On the Mitac website I can find reference to the MB5500c but they appear to have no data on the site. You could register and enquire.
Don't forget to try the spelling "Gloablyst" when searching...
