Page 1 of 1

80GB: ECS P6BAT-A+ PCB 1.1

Posted: Wed Feb 26, 2003 12:36 pm
by Inti31
I've the latest BIOS 1.0h from the ECS-Homepage.
The BIOS will not detect the Primary Master Harddisk MAXTOR 80GB (4D080H4)(=DiamondMax D540X-4D), System hangs.
Only if I set the Jumper on LimitCylinder too, the BIOS detect the Harddisk,
But when i will install w2k/XP, the System show me only 32GB (one Harddisk-partition, but the harddisk is always partitioned.
The BIOS Setting for Primary Master ist set to AUTO
What Should I Do? Help me please
Sorry about my bad english.

Thanks a lot
Harry

Posted: Wed Feb 26, 2003 7:17 pm
by edwin
use at own risk

http://wims.rainbow-software.org/edwin/

please report results.

The Fw Beta 128GB for P6BAT-A+ PCB 1.1 - IT WORKS FINE !!!

Posted: Wed Feb 26, 2003 10:40 pm
by Inti31
I've flashed the BIOS with the Beta Fw 128GB - all works fine.
No Probs. The Management of all Partitions is okay.


Harry :)

Sorry - my english :)

Posted: Fri Feb 28, 2003 8:04 am
by edwin
Harry, don't worry about your English. Thank you for reporting :D