Page 1 of 1
60GB: 63-0211-001188-00101111-071595
Posted: Fri Jul 18, 2003 4:12 am
by rbgaz
Hi,
I have a Q-lity motherboard ( manufactured by Quanta) that will not accept anything over 30 GB hard drive. My subject contains my BIOS string; it's an AMI BIOS. Can someone direct me to where I can get a flash upgrade for it or actually send it to me? Thanks so much!
Bob
Posted: Fri Jul 18, 2003 7:29 am
by rbgaz
...another tidbit..after BIOS numbers there's Whitney-1Whitney-5
Posted: Fri Jul 18, 2003 10:57 am
by NickS
Google search reveals
http://y2k.nstl.com/html/quanta_y2k_compliant.html which says that is P3810-T or P3810E-T, same BIOS. There should be a message along the lines of
10/04/99 BQ4A13 P3810E-T under the AMI logo.
http://www.quantatw.com for homepage
http://www.quantatw.com/Customer/ebios1.asp for BIOS downloads
Posted: Fri Jul 18, 2003 6:57 pm
by rbgaz
Thanks Nick,
The download file is a .rom file. How is that flashed? Thanks
Posted: Sat Jul 19, 2003 3:37 am
by rbgaz
Well, I downloaded an AMI flash program and when I run it I get an error message that says " This BIOS does not suppoprt a flash upgrade". Am I screwed? Thanks
Posted: Sat Jul 19, 2003 11:21 am
by Rainbow
Try another version of AMIFlash or try UniFlash.
Posted: Sat Jul 19, 2003 5:29 pm
by rbgaz
I tried Uniflash and entered the ROM file but got an error meassage that there was a bootblock mismatch so I didn't continue.
Posted: Mon Jul 21, 2003 1:37 pm
by NickS
The "bootblock mismatch" error indicates either that you have the wrong BIOS or that the bootblock has been updated as well as the main BIOS. In this case the identification is clear so it should not be the wrong BIOS. To flash both main BIOS and bootblock with Uniflash, you need to go into the "Advanced" menu and select the option to flash the bootblock