80GB: Tekram p6b40-a4x
Posted: Fri Aug 29, 2003 9:25 pm
I flashed my bios with the provided "patched" bios named - p6bax110.bin on this website, Yet when I boot my machine it hangs at detecting primary ide. Is there any special jumper settings to get it to work. I just have one hdd with no jumpers as it is a single or master.
Or maybe the flash failed and it is still working on the original. Is there a way to check if the new bios was copied?
I've flashed my bios about 5 times with this new one and i am stumped. I've read old posts of people getting it to work on thier boards but I don't know where to go from here. Any help would be greatly appreciated. Bill
This reads at the bottom of my screen on boot up:
12/23/98-i440bx-w83977-2a69ktg9c-00
Or maybe the flash failed and it is still working on the original. Is there a way to check if the new bios was copied?
I've flashed my bios about 5 times with this new one and i am stumped. I've read old posts of people getting it to work on thier boards but I don't know where to go from here. Any help would be greatly appreciated. Bill
This reads at the bottom of my screen on boot up:
12/23/98-i440bx-w83977-2a69ktg9c-00