Page 1 of 1
40GB: 62-0406-001437-00101111-071595-440bx-M761_3.0-8671-H
Posted: Wed Oct 01, 2003 7:33 pm
by NeoDd
My quantum 40GB hard drive isn't recognized.
Please help me!
How could I fix my bios or where I could find updated for this setting bios.
Please help me!
Posted: Wed Oct 01, 2003 8:02 pm
by ajzchips
There aren't any...
Posted: Thu Oct 02, 2003 5:28 am
by NeoDd
There aren't any EPROM support 40Gb hard disk. I can't found.
Please help!
How could I fix my EPROM hard disk table? Could I?
Posted: Thu Oct 02, 2003 6:19 pm
by NickS
Are you sure that the 32GB limit jumper has been removed from the drive ?
Posted: Thu Oct 02, 2003 6:26 pm
by Rainbow
If the jumpers are set correctly, and it still does not work properly, enter HDD parameters manually in SETUP.
Where could I find that jumper?
Posted: Sun Oct 05, 2003 5:21 pm
by NeoDd
Where could I find that jumper?
I couldn't find. There are only 3 jumper settings that master, slave and cs.
Now I set manually.
Posted: Sun Oct 05, 2003 8:12 pm
by Denniss
It seems you already have the latest 19990406 Bios installed
Look at your HDD - the parameters for Cylinder Head and Sector should be written onto it .
Enter Bios setup and enter these values manually at the port your HDD is connected to and enable LBA for this port
Usually your HDD should work with full capacity then
Tested with M571 M560TG M715
