Page 1 of 1
40GB: 52-0323-001437-00101111-071595-000000-001_01_M598LMR
Posted: Wed Dec 31, 2003 9:07 pm
by DC
40 GB / 52-0323-001437-00101111-071595-000000-001_01_M598LMR
OEM Sign-On: Release 03/23/2000S
Chipset: SiS 530 rev 3
Posted: Wed Dec 31, 2003 10:02 pm
by ajzchips
That BIOS should support it already.
Posted: Fri Jan 02, 2004 11:32 pm
by DC
When I get into the BIOS to detect the nwe HDD, it starts searching it but then it gets stuck and I've to reset the PC because it doesn't respond.
Posted: Sat Jan 03, 2004 12:02 am
by edwin
Brand/model of the HDD? Cabling details?
Posted: Sat Jan 03, 2004 2:13 am
by DC
HDD: Western Digital 40GB 7200RPM.
I tried with the cables my actual HDD has (Primary Master) and with Primary slave too but nothing happened.
Posted: Sat Jan 03, 2004 12:14 pm
by edwin
If the drive is sitting by itself on the cable (no other device connected), connect it on the black connector, blue connector to the motherboard. On the drive itself remove the jumper to set it for "Single Drive" mode, not "Master", else it will look for a slave device forever.
