BIOS Updates forum

Posted: **Tue Jul 06, 2004 10:17 pm**

my ms-6159 mobo will not recognise the 80gb maxtor hdd i am attempting to install as a slave.
my bios string is as follows:
61-0413-001169-00111111-07159-440LX-1440L000-H
it is an ami bios
the master is another maxtor hdd of 8GB capacity.
The large hdd appears in the os (winxp pro), but not in the bios which is set to AUTO .
MSI germany has bios v1.6 but other sources only v1.2.
Unit will not post if larger hdd is set to slave, but will post if set as slave with a limit of 40gb with appropriate jumper setting (cvl or clv whatever)
any help greatly appreciated.
NTFS used.

Posted: **Tue Jul 06, 2004 10:49 pm**

You haven't told us which is YOUR version. 1.2? 1.6? Other?

Posted: **Wed Jul 07, 2004 12:00 am**

Please post the AMI BIOS OEM Message !!

Should look like A6159MS V1.2 or similar !

Sandra/Aida/Everest should be able to read this

Posted: **Wed Jul 07, 2004 11:07 am**

sorry about delay - work commitments
A6159 P2 v1.3 is what you are asking for i hope.
incidently the mobo version of this ms-6159 is v1.0

Posted: **Wed Jul 07, 2004 1:17 pm**

OK, you've got version 1.3 then. Try the German 1.6 and try your HDD.

Posted: **Thu Jul 08, 2004 9:49 pm**

v1.6 bios successfully installed
post screen sees 65GB of hdd but it does not
appear in My Computer at all only the 8.4gb hdd master.
appears in Device Manager but not seen when Everest
utility is used.
any further suggestions appreciated.

Posted: **Thu Jul 08, 2004 11:46 pm**

You have to partition and format your drive first before windoze is able to store data on it !

Posted: **Fri Jul 09, 2004 9:07 pm**

successfully installed the 80Gb hard drive by using maxblast hdd installer for maxtor hard drives (after updating the bios and setting drive as slave.)
thanks for your advice, appreciated.

BIOS Updates forum

80GB: ms-6159

80GB: ms-6159