80GB: 51-0906-000000-00101111-071599-41E_43C-MS5169-T99
Posted: Wed Jan 05, 2005 6:35 pm
BIOS Auto Detect does not detect the new Samsung 80 GB HD I purchased. The new HD is connected via IDE.
Steps taken sofar:
Flashed the BIOS to upgrade from V3.3 to V3.7 with rom file and flash utility as found on the MSI Website for the MS-5169 board (info on other forums indicated that 3.7 would support disks up to 120 GB). BIOS V3.7 however does not detect the HD. When I strap the HD to limit its capacity to 32 GB, then BIOS V 3.7 does properly detect the HD!
Next step: find a BIOS that does support 80GB ( ..... help !)
Details of my system are:
Board: MS-5169 V4.0, Microstar International
CPU: AMD-K6 (tm) 3D processor 450 MHz
Chipset: ALi M1541 rev 4
OS: Win 98 SE Version 4.10.2222
BIOS Type: American Megatrends
BIOS Date: 09/08/00
BIOS ID: see subject title
BIOS OEM Signon: A5169MS V3.7 090800
Thanks in advance for your suggestions
Eric
Steps taken sofar:
Flashed the BIOS to upgrade from V3.3 to V3.7 with rom file and flash utility as found on the MSI Website for the MS-5169 board (info on other forums indicated that 3.7 would support disks up to 120 GB). BIOS V3.7 however does not detect the HD. When I strap the HD to limit its capacity to 32 GB, then BIOS V 3.7 does properly detect the HD!
Next step: find a BIOS that does support 80GB ( ..... help !)
Details of my system are:
Board: MS-5169 V4.0, Microstar International
CPU: AMD-K6 (tm) 3D processor 450 MHz
Chipset: ALi M1541 rev 4
OS: Win 98 SE Version 4.10.2222
BIOS Type: American Megatrends
BIOS Date: 09/08/00
BIOS ID: see subject title
BIOS OEM Signon: A5169MS V3.7 090800
Thanks in advance for your suggestions
Eric