Page 1 of 1
40GB: 07/03/1998-ITE8671-2A69JV3FC-00
Posted: Fri Jan 07, 2005 1:34 pm
by anindito
BIOS Manufacturer : Award Modular BIOS v4.51PG
BIOS ID : 07/03/1998-ITE8671-2A69JV3FC-00
BIOS Date : 07/03/98
BIOS OEM Signon : BIOS-I (80703)
BIOS ROM Size : 128K
Chipset : Intel 440EX/LX rev 3
Super I/O Chip : ITE 8671 found at port 279h
I've been searching in
http://wims.rainbow-software.org/index. ... 0&count=40 12/23/1998-ITE8671-2A69JV3FC-00,only with diffrent bios date,can i use this bios update to solve my problem with 40 GB HD seagate baracuda ? thx for your help
Posted: Fri Jan 07, 2005 8:38 pm
by NickS
If the later part of the BIOS ID matches,you should be able to use that BIOS.
Does your board say LXB834D, LXB843D, EXB831D or EXB841D somewhere on it?
Posted: Fri Jan 07, 2005 9:22 pm
by Denniss
Our patched Bios can't work because of different I/O chipset - the patched Bios is for SMC I/O.
Vtech/PcPartner board - should have a 35-8804-32 or similar board identifier code printed onto the board usually between the PCI-slots.
Posted: Fri Jan 07, 2005 10:10 pm
by NickS
Dennis, I meant our patched BIOS:
PC Partner LXB834D, LXB843D, EXB831D and EXB841D boards with ITE8671 I/O 128KB,
Bios ID: 12/23/1998-ITE8671-2A69JV3FC-00
BIOS message: BIOS-I (81223) patched for HDD to 128 Gb
Good point about the 35-xxxx-xx number, I forgot that.
board identifier
Posted: Sat Jan 08, 2005 2:53 am
by anindito
board identifier is 35-8831-02 is this pcpartner bios from
http://www.pcpartner.com/support/bios/i440.htm#440lx solve this problem ?. What shoul i choose from pcpartner site bios date code 81223 LXB834D
(For ITE 8671 I/O) or bios date code 80703 ???
Posted: Sat Jan 08, 2005 2:22 pm
by NickS
That is the right BIOS for your board but it will not solve the problem. Use our patched version of that BIOS,
PC Partner LXB834D, LXB843D, EXB831D and EXB841D boards with ITE8671 I/O 128KB at the "tested" link below.
Link to BIOS Zip file
it's works
Posted: Sat Jan 08, 2005 5:27 pm
by anindito
Thanks Pals,it's works............
Posted: Sat Jan 08, 2005 10:43 pm
by NickS
Glad to hear it, thanks for the feedback.