Page 1 of 1

80GB: 02/09/1999-i440BX-DD-2A69KD4FC-00

Posted: Thu Jun 30, 2005 3:11 am
by BleedingMe
My bios wont detect my Seagate 80gb, so I'm looking to update my bios if possible. But I'm not sure which one to download.

Here is my settings

Generated by: BIOS Wizard 2.10
Date: June 29, 2005
Time: 17:29

PnP Version : BIOS currently supports latest version 1.0
PCI Version : BIOS currently supports latest version 2.1
PCI IRQ Routing Table : BIOS currently supports this feature
Enhanced Disk Drive
Specification : BIOS doesn't support this feature
DMI Version : Current version is 2.0. The minimum DMI version is
2.1
ACPI Version : BIOS currently supports latest version 1.0
APM Version : BIOS currently supports latest version 1.2
Booting From CD-ROM : BIOS currently supports this feature
Supports ESCD : BIOS currently supports this feature
Can be Updated (flashed) : BIOS currently supports this feature
Can be Shadowed : BIOS currently supports this feature
BIOS Chip in Socket : BIOS currently supports this feature
Supports Selective Booting : BIOS currently supports this feature
Supports LS-120 Booting : The testing of this feature is not supported by
the current DMI version
Supports ZIP Booting : The testing of this feature is not supported by
the current DMI version
Supports Network Booting : The testing of this feature is not supported by
the current DMI version
BIOS Manufacturer : Award Modular BIOS v4.51PG
BIOS ID : 02/09/1999-i440BX-DD-2A69KD4FC-00
BIOS Date : 02/09/99
BIOS OEM Signon :
BIOS ROM Size : 256K
Chipset : Intel 440BX/ZX rev 3
Super I/O Chip : Winbond 83977EF found at port 3F0h

Any help would be much appreciated.

Cheers

Posted: Fri Jul 01, 2005 5:54 am
by BleedingMe
No matter now. Found a bios upgrade over at driverguide. Flashed it, then blank screen. Whole things stuffed now!

Posted: Fri Jul 01, 2005 3:00 pm
by ajzchips
Tried clearing CMOS? Do you have floppy access?