Maxtor DiamondMax Model 6B300R0 Size 300GB not recognized
Posted: Sat Dec 10, 2005 3:04 am
Hi !
This is the disk that comes with the Maxtor OneTouch 300 GB external usb disk.
Now, what I orginally intended was to use this external disk as a media storage station formated with ext2/ext3 and share it on my LAN/wLAN with samba. However I found that this was not the best of ideas, due to the slow rate of the USB 1.0 connection (what was i thinking ?)
So, what I want to do now is to replace this disk with my 80 GB mp3 disk. Problem is - of course - that my BIOS does not seem to support disks this large.
Also, I had a problem similar to this a couple of years ago (with my 80 GB) --> http://www.wimsbios.com/phpBB2/viewtopi ... light=brio
The patched bios by ajzchips is the one I am currently using.
Could this be solved in a similar way ?
Thnx
This is the disk that comes with the Maxtor OneTouch 300 GB external usb disk.
Now, what I orginally intended was to use this external disk as a media storage station formated with ext2/ext3 and share it on my LAN/wLAN with samba. However I found that this was not the best of ideas, due to the slow rate of the USB 1.0 connection (what was i thinking ?)
So, what I want to do now is to replace this disk with my 80 GB mp3 disk. Problem is - of course - that my BIOS does not seem to support disks this large.
Also, I had a problem similar to this a couple of years ago (with my 80 GB) --> http://www.wimsbios.com/phpBB2/viewtopi ... light=brio
The patched bios by ajzchips is the one I am currently using.
Could this be solved in a similar way ?
Thnx